Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
White brass G1/4 90-degree rotary elbow fitting with 20mm extension and 360-degree rotation

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Sky White

SKU CH-3M1H-4SFA7

A G1/4 rotary 90-degree elbow with 20mm extension and 360-degree adjustment for tight tubing runs

  • TypeFittings

Option Sky White

Sjá 9 stillingar til viðbótar

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • 360-degree rotary lets you aim the connection in any direction
  • 90-degree elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance for components in the way
  • 43 mm total height fits low-profile builds
  • Brass construction with SX powder-coated Sky White finish

G1/4 90° Rotary Extension Elbow

This PrimoChill fitting is a male-to-female G1/4 adapter designed for custom liquid-cooling loops. Its 90-degree elbow redirects tubing runs away from components, while the 20mm extension adds clearance where space is tight. The 360-degree rotary action lets you orient the outlet in any direction after installation. A Sky White SX powder-coated finish matches themed builds.

Builders routing tubing in confined spaces

The fitting suits builders who need an immediate right-angle turn with adjustable rotation and a small height gain. It works with standard G1/4 threaded components in single-loop configurations. The design does not address loops that require straight-through couplers, multi-port distribution blocks, or larger thread sizes such as G3/8. Buyers needing quick-disconnect or valve functions should look elsewhere.

Check thread compatibility and clearance

Verify that every component in the loop uses G1/4 threads before ordering. Confirm the 43mm total height and 20mm installed base height fit within your case layout without fouling nearby parts. Ensure the 5mm thread depth matches the port depth on your blocks, radiators, or reservoirs. Plan the rotary orientation so tubing runs remain kink-free after final positioning.

Helstu kostir

  • 360-degree rotary lets you aim the connection in any direction
  • 90-degree elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance for components in the way
  • 43 mm total height fits low-profile builds
  • Brass construction with SX powder-coated Sky White finish

Tæknilýsing

TypeFittings

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Which thread size must my existing block or radiator have so this G1/4 elbow can screw in?

Both the male and female threads are G1/4, so the component you are connecting to must also use a G1/4 port.

Will the 360-degree rotary base let me align the 90-degree bend without stressing rigid tubing runs?

Yes, the rotary joint spins freely through 360 degrees, letting you orient the 90-degree elbow precisely before tightening.

After installation, how can I confirm the 20mm extension and 43mm total height give the clearance I needed?

Measure from the port face to the centre of the outlet; it should read 20 mm of added reach and 43 mm overall height.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.