Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
UV green brass rotary elbow fitting with 20mm extension and G1/4 threads

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Fitting UV Green

SKU CH-AD1D-XMCVE

A 90-degree rotary G1/4 fitting with 20mm extension and 360-degree adjustment for custom liquid-cooling loops

  • TypeFittings

Option UV Green

Sjá 9 stillingar til viðbótar

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Rotary joint spins 360 degrees for flexible tube routing
  • 90 degree elbow redirects flow around tight component layouts
  • 20mm extension adds clearance between block and fitting
  • Brass construction with UV green powder coat resists corrosion
  • G1/4 threads fit standard water-cooling components

G1/4 90° Rotary Extension Elbow

This PrimoChill fitting redirects rigid or soft tubing at a right angle while adding a 20mm standoff from the component. The 360 degree rotary base lets the outlet face any direction after the port is tightened. A UV green SX powder coat gives the brass body a reactive finish under black-light.

Builders needing tight 90° turns

Ideal for loops where a standard elbow would hit a motherboard heatsink, GPU back-plate or reservoir bracket. The rotary joint removes the need to clock the fitting perfectly during installation. Not suited for runs that must stay completely flush to the block or that require in-line straight connections.

20mm installed base height

This single measurement decides whether the elbow clears neighbouring parts or creates a new interference. At 43mm total height and 5mm thread depth, the 20mm standoff is the figure to check against your component stack before ordering.

Helstu kostir

  • Rotary joint spins 360 degrees for flexible tube routing
  • 90 degree elbow redirects flow around tight component layouts
  • 20mm extension adds clearance between block and fitting
  • Brass construction with UV green powder coat resists corrosion
  • G1/4 threads fit standard water-cooling components

Tæknilýsing

TypeFittings

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 360 degree rotary joint loosen under continuous pump vibration?

The brass rotary mechanism is designed to hold its orientation once positioned; periodic re-tightening is not required for normal loop operation.

Does the powder-coated finish add measurable thermal resistance to the 20mm extension?

The SX coating is only microns thick on brass, so heat transfer through the 20mm standoff remains effectively unchanged.

Which existing fittings must already use G1/4 threads to connect this elbow?

Any male or female G1/4 port — radiator, block, reservoir, pump or another rotary adapter — will thread directly onto this fitting.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.