Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
UV green brass rotary elbow fitting with 20mm extension and G1/4 threads

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Fitting UV Green

SKU CH-AD1D-XMCVE

A 90-degree rotary G1/4 fitting with 20mm extension and 360-degree adjustment for custom liquid-cooling loops

  • TypeFittings

Option UV Green

Vedeți celelalte 9 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

  • Rotary joint spins 360 degrees for flexible tube routing
  • 90 degree elbow redirects flow around tight component layouts
  • 20mm extension adds clearance between block and fitting
  • Brass construction with UV green powder coat resists corrosion
  • G1/4 threads fit standard water-cooling components

G1/4 90° Rotary Extension Elbow

This PrimoChill fitting redirects rigid or soft tubing at a right angle while adding a 20mm standoff from the component. The 360 degree rotary base lets the outlet face any direction after the port is tightened. A UV green SX powder coat gives the brass body a reactive finish under black-light.

Builders needing tight 90° turns

Ideal for loops where a standard elbow would hit a motherboard heatsink, GPU back-plate or reservoir bracket. The rotary joint removes the need to clock the fitting perfectly during installation. Not suited for runs that must stay completely flush to the block or that require in-line straight connections.

20mm installed base height

This single measurement decides whether the elbow clears neighbouring parts or creates a new interference. At 43mm total height and 5mm thread depth, the 20mm standoff is the figure to check against your component stack before ordering.

Puncte forte

  • Rotary joint spins 360 degrees for flexible tube routing
  • 90 degree elbow redirects flow around tight component layouts
  • 20mm extension adds clearance between block and fitting
  • Brass construction with UV green powder coat resists corrosion
  • G1/4 threads fit standard water-cooling components

Specificații

TypeFittings

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 360 degree rotary joint loosen under continuous pump vibration?

The brass rotary mechanism is designed to hold its orientation once positioned; periodic re-tightening is not required for normal loop operation.

Does the powder-coated finish add measurable thermal resistance to the 20mm extension?

The SX coating is only microns thick on brass, so heat transfer through the 20mm standoff remains effectively unchanged.

Which existing fittings must already use G1/4 threads to connect this elbow?

Any male or female G1/4 port — radiator, block, reservoir, pump or another rotary adapter — will thread directly onto this fitting.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.