Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Brass male-to-female G 1/4 inch extension coupler 35mm length knurled finish

PrimoChill

PrimoChill Male to Female G 1/4in 35mm SX Extension Coupler diy cooling

SKU CH-M748-1C3HF

A coated-brass G 1/4in male-to-female extension coupler adds 35mm of clearance between water-cooling fittings

  • TypeCPU Block

Option UV Red

Lihat 9 konfigurasi lagi

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

  • Extends fittings by 35 mm for tight clearances
  • Male-to-female G 1/4 in threads connect standard water-cooling parts
  • Coated brass body resists corrosion in custom loops
  • 40 mm overall height including threads keeps profile low
  • Includes pre-installed O-ring on male side for leak-free seal

Extension Coupler for Custom Loops

The PrimoChill Male to Female G 1/4in 35mm SX Extension Coupler adds length to a water-cooling fitting so builders can clear obstructions in tight routing paths. It suits anyone assembling a custom loop who needs a little extra reach between components.

Coated Brass Construction

The coupler is machined from coated brass with a 35mm body height and 40mm overall height including threads. One end carries a male G 1/4in thread with a pre-installed O-ring, the other a female G 1/4in thread for a secure, leak-resistant seal.

Sustained Pressure Sealing

Under continuous loop pressure the brass threads and seated O-ring maintain their seal without deformation. The fixed 35mm extension does not flex, so alignment stays constant during long-term operation.

Ciri-ciri utama

  • Extends fittings by 35 mm for tight clearances
  • Male-to-female G 1/4 in threads connect standard water-cooling parts
  • Coated brass body resists corrosion in custom loops
  • 40 mm overall height including threads keeps profile low
  • Includes pre-installed O-ring on male side for leak-free seal

Spesifikasi

TypeCPU Block

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How do I install the PrimoChill G 1/4in 35mm SX Extension Coupler, and which step is often missed?

Screw the male thread into the component and the female thread onto the fitting; the step people forget is confirming the pre-installed O-ring on the male side seats fully before tightening.

What maintenance or replacement will the PrimoChill G 1/4in 35mm SX Extension Coupler need later?

Inspect the coated brass body and the installed O-ring periodically; replace the O-ring if it hardens or shows cracks to maintain a leak-free seal.

What limit appears first on the PrimoChill G 1/4in 35mm SX Extension Coupler under sustained use?

The 35mm body length and 40mm overall height fix the clearance envelope; if components shift and exceed that space the coupler cannot compensate.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.