Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Six nickel-plated brass compression fittings with diamond-knurl caps in 34 colours

PrimoChill

PrimoChill RevolverSX Rigid Fitting 6-pack 34 colours

SKU CH-FMK5-B5N55

Six rigid compression fittings with G 1/4 threads, nickel-plated brass cores and SpectraX powder-coated caps in 34 colours for 1/2 in. OD tubing

  • TypeCPU Block

Option UV Red

Rodyti 10 daugiau konfigūracijų

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • SpectraX powder coating delivers consistent colour accuracy across 34 finishes
  • Bright nickel-plated brass core resists corrosion for long-term loop reliability
  • Diamond-knurl compression caps provide secure grip on rigid tubing
  • G 1/4 threads ensure compatibility with standard water-cooling components
  • Six fittings included to complete a full custom loop build

Fittings for 3/8 ID rigid tubing

This six-pack of PrimoChill RevolverSX compression fittings is built for custom-loop builders who run 3/8 in. ID by 1/2 in. OD rigid tubing in PETG, PMMA or copper. Each fitting uses industry-standard G 1/4 threads so it threads directly into most water-blocks, radiators and reservoirs without adapters.

Brass core with nickel plating resists corrosion

The G 1/4 threaded core is machined from brass and plated in bright nickel to withstand long-term coolant contact without degradation. SpectraX powder-coated caps add a durable colour layer that does not flake or fade, keeping the loop's appearance consistent over years of service.

Diamond-knurl caps in 34 colour options

Knurled compression caps give a secure grip for hand-tightening while the 34 available colours let builders match or contrast tubing, coolant and component accents. The fittings are sold as a six-pack with no additional tools or seals included, so plan the exact quantity your loop topology requires.

Privalumai

  • SpectraX powder coating delivers consistent colour accuracy across 34 finishes
  • Bright nickel-plated brass core resists corrosion for long-term loop reliability
  • Diamond-knurl compression caps provide secure grip on rigid tubing
  • G 1/4 threads ensure compatibility with standard water-cooling components
  • Six fittings included to complete a full custom loop build

Specifikacijos

TypeCPU Block

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the PrimoChill RevolverSX fittings on 1/2 in. OD rigid tubing, and what step is often missed?

Chamfer and deburr the tube end, slide the compression cap on first, then push the tube fully over the G 1/4 threaded brass core before tightening the diamond knurl cap to seal the O-ring.

What maintenance or replacement will the RevolverSX fittings need over time?

Inspect the O-rings inside each nickel-plated brass core during loop draining; replace any that have flattened or cracked, and re-torque the diamond knurl caps after the first few thermal cycles.

What limit appears first when the RevolverSX fittings run under sustained load?

The practical limit is the rigid tubing material — PETG, PMMA or copper — since the SpectraX powder-coated caps and nickel-plated brass core are rated for continuous loop temperatures.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.