Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six nickel-plated brass compression fittings with diamond-knurl caps in 34 colours

PrimoChill

PrimoChill RevolverSX Rigid Fitting 6-pack 34 colours

SKU CH-FMK5-B5N55

Six rigid compression fittings with G 1/4 threads, nickel-plated brass cores and SpectraX powder-coated caps in 34 colours for 1/2 in. OD tubing

  • TypeCPU Block

Option UV Red

Nog 10 configuraties tonen

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • SpectraX powder coating delivers consistent colour accuracy across 34 finishes
  • Bright nickel-plated brass core resists corrosion for long-term loop reliability
  • Diamond-knurl compression caps provide secure grip on rigid tubing
  • G 1/4 threads ensure compatibility with standard water-cooling components
  • Six fittings included to complete a full custom loop build

Fittings for 3/8 ID rigid tubing

This six-pack of PrimoChill RevolverSX compression fittings is built for custom-loop builders who run 3/8 in. ID by 1/2 in. OD rigid tubing in PETG, PMMA or copper. Each fitting uses industry-standard G 1/4 threads so it threads directly into most water-blocks, radiators and reservoirs without adapters.

Brass core with nickel plating resists corrosion

The G 1/4 threaded core is machined from brass and plated in bright nickel to withstand long-term coolant contact without degradation. SpectraX powder-coated caps add a durable colour layer that does not flake or fade, keeping the loop's appearance consistent over years of service.

Diamond-knurl caps in 34 colour options

Knurled compression caps give a secure grip for hand-tightening while the 34 available colours let builders match or contrast tubing, coolant and component accents. The fittings are sold as a six-pack with no additional tools or seals included, so plan the exact quantity your loop topology requires.

Pluspunten

  • SpectraX powder coating delivers consistent colour accuracy across 34 finishes
  • Bright nickel-plated brass core resists corrosion for long-term loop reliability
  • Diamond-knurl compression caps provide secure grip on rigid tubing
  • G 1/4 threads ensure compatibility with standard water-cooling components
  • Six fittings included to complete a full custom loop build

Specificaties

TypeCPU Block

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install the PrimoChill RevolverSX fittings on 1/2 in. OD rigid tubing, and what step is often missed?

Chamfer and deburr the tube end, slide the compression cap on first, then push the tube fully over the G 1/4 threaded brass core before tightening the diamond knurl cap to seal the O-ring.

What maintenance or replacement will the RevolverSX fittings need over time?

Inspect the O-rings inside each nickel-plated brass core during loop draining; replace any that have flattened or cracked, and re-torque the diamond knurl caps after the first few thermal cycles.

What limit appears first when the RevolverSX fittings run under sustained load?

The practical limit is the rigid tubing material — PETG, PMMA or copper — since the SpectraX powder-coated caps and nickel-plated brass core are rated for continuous loop temperatures.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.