Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Red silk PLA filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA like SILK Red 1.75 mm 1 Kg 3d printers accessory

SKU CH-38S5-4H9ME

1.75 mm PLA silk filament on a 1 kg vacuum-sealed spool with ±.03 mm accuracy for glossy, low-warp prints at 200–220 °C

  • ColorRed
  • TypeFilament

Color Red

  • Silk-like gloss finish from high-gloss PLA formula
  • 75 mm diameter with ±0.03 mm dimensional accuracy
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Prints at 200 °C – 220 °C for broad printer compatibility
  • 100 % new high-purity PLA reduces warping and clogging

PrintOxe PLA Silk Red Filament

This 1.75 mm PLA Silk filament comes in a 1 Kg vacuum-sealed spool with desiccant for moisture protection. It produces a high-gloss, shiny surface finish on printed parts. The material is described as non-toxic and eco-friendly, made from corn starch. It suits makers who want a silk texture without specialty hardware.

Check printer temperature and spool fit

Verify that your printer can reach the recommended extrusion range of 200°C to 220°C. Confirm the spool dimensions — 7.88" diameter, 2.69" width and 2.20" hub hole — match your holder or enclosure. The filament diameter is held to a tolerance of +/- 0.03 mm. Colour may differ slightly from screen images.

Consistent flow during long prints

The tight diameter tolerance supports steady extrusion over extended jobs, reducing the risk of clogging or blistering. Low shrinkage and minimal warping help large or flat models stay dimensionally accurate throughout the build. Vacuum sealing with desiccant keeps the filament dry until you start printing.

Privalumai

  • Silk-like gloss finish from high-gloss PLA formula
  • 75 mm diameter with ±0.03 mm dimensional accuracy
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Prints at 200 °C – 220 °C for broad printer compatibility
  • 100 % new high-purity PLA reduces warping and clogging

Specifikacijos

BrandPrintOxe
ModelPLA like SILK
ColorRed
TypeFilament

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What comes in the box and is anything else needed to start printing?

The box contains one vacuum-sealed 1 kg spool of 1.75 mm PLA Silk filament with desiccant. No extra items are required if the printer accepts 1.75 mm spools with a 5.59 cm hub hole.

How do I decide between the listed colour and other options?

This listing is for the single Pinkish Red Silk variant; choose it when a high-gloss, shiny surface finish in that specific hue is desired.

What does the ±0.03 mm dimensional accuracy mean for everyday prints?

It keeps the 1.75 mm diameter within tight limits, reducing clog risk and helping layers bond cleanly at the recommended 200–220 °C nozzle temperature.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.