Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Red silk PLA filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA like SILK Red 1.75 mm 1 Kg 3d printers accessory

SKU CH-38S5-4H9ME

1.75 mm PLA silk filament on a 1 kg vacuum-sealed spool with ±.03 mm accuracy for glossy, low-warp prints at 200–220 °C

  • ColorRed
  • TypeFilament

Color Red

  • Silk-like gloss finish from high-gloss PLA formula
  • 75 mm diameter with ±0.03 mm dimensional accuracy
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Prints at 200 °C – 220 °C for broad printer compatibility
  • 100 % new high-purity PLA reduces warping and clogging

PrintOxe PLA Silk Red Filament

This 1.75 mm PLA Silk filament comes in a 1 Kg vacuum-sealed spool with desiccant for moisture protection. It produces a high-gloss, shiny surface finish on printed parts. The material is described as non-toxic and eco-friendly, made from corn starch. It suits makers who want a silk texture without specialty hardware.

Check printer temperature and spool fit

Verify that your printer can reach the recommended extrusion range of 200°C to 220°C. Confirm the spool dimensions — 7.88" diameter, 2.69" width and 2.20" hub hole — match your holder or enclosure. The filament diameter is held to a tolerance of +/- 0.03 mm. Colour may differ slightly from screen images.

Consistent flow during long prints

The tight diameter tolerance supports steady extrusion over extended jobs, reducing the risk of clogging or blistering. Low shrinkage and minimal warping help large or flat models stay dimensionally accurate throughout the build. Vacuum sealing with desiccant keeps the filament dry until you start printing.

Helstu kostir

  • Silk-like gloss finish from high-gloss PLA formula
  • 75 mm diameter with ±0.03 mm dimensional accuracy
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Prints at 200 °C – 220 °C for broad printer compatibility
  • 100 % new high-purity PLA reduces warping and clogging

Tæknilýsing

BrandPrintOxe
ModelPLA like SILK
ColorRed
TypeFilament

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What comes in the box and is anything else needed to start printing?

The box contains one vacuum-sealed 1 kg spool of 1.75 mm PLA Silk filament with desiccant. No extra items are required if the printer accepts 1.75 mm spools with a 5.59 cm hub hole.

How do I decide between the listed colour and other options?

This listing is for the single Pinkish Red Silk variant; choose it when a high-gloss, shiny surface finish in that specific hue is desired.

What does the ±0.03 mm dimensional accuracy mean for everyday prints?

It keeps the 1.75 mm diameter within tight limits, reducing clog risk and helping layers bond cleanly at the recommended 200–220 °C nozzle temperature.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.