Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Blue silk-finish PLA filament spool, 1.75 mm diameter, 1 kg net weight

PrintOxe

PrintOxe PLA like SILK Blue Filament 1.75 mm 1 Kg

SKU CH-NFGY-JD94J

1 kg spool of 1.75 mm blue PLA silk filament with ±0.03 mm accuracy, vacuum-sealed with desiccant, prints at 200–220 °C for a high-gloss finish

  • ColorBlue
  • TypeFilament

Color Blue

  • Silk-like gloss finish creates striking visual prints
  • Dimensional accuracy of +/- .03 mm ensures precise extrusion
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • 75 mm diameter works with many popular 3D printers
  • 100 % new high-purity PLA reduces warping and clogging

What the filament is and who it suits

PrintOxe PLA like SILK Blue is a 1.75 mm diameter filament supplied on a 1 kg spool. It targets hobbyists and professionals who want a high-gloss silk finish on decorative prints. The material is a corn-starch-based PLA blend vacuum-sealed with desiccant to resist moisture. Dimensional accuracy is held to +/- .03 mm for consistent extrusion.

Temperature behaviour and everyday handling

Recommended nozzle temperature sits between 200 °C and 220 °C (392 °F to 428 °F). The high-purity formulation reduces shrinkage and warping during normal printing, helping to prevent clogging or blistering. The spool measures 7.88 in diameter by 2.69 in width with a 2.20 in hub hole, fitting most common desktop printers.

Sustained printing performance

During long prints the filament maintains steady flow thanks to its tight .03 mm tolerance and low moisture content from the sealed packaging. The silk texture yields a uniform shiny surface without requiring post-processing. Users who need higher temperature resistance or engineering-grade mechanical properties should choose a different material class.

Helstu kostir

  • Silk-like gloss finish creates striking visual prints
  • Dimensional accuracy of +/- .03 mm ensures precise extrusion
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • 75 mm diameter works with many popular 3D printers
  • 100 % new high-purity PLA reduces warping and clogging

Tæknilýsing

BrandPrintOxe
ModelPLA like SILK
ColorBlue
TypeFilament

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I load the 1.75 mm spool and what step do people skip?

Mount the spool on the holder, feed the filament into the extruder, then heat the nozzle to 200°C - 220°C and extrude until the new colour flows; people often forget to pre-heat before pushing the filament.

What will need replacing after this 1 Kg roll is used?

The filament itself is consumed during printing; once the 1 Kg spool is empty you simply buy another roll — no other part of the printer wears out from this material.

What is the first quality limit that appears during a long print?

Dimensional accuracy holds to ±0.03 mm, so the first limit you hit is the filament running out after 1 Kg of extrusion.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.