Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Blue silk-finish PLA filament spool, 1.75 mm diameter, 1 kg net weight

PrintOxe

PrintOxe PLA like SILK Blue Filament 1.75 mm 1 Kg

SKU CH-NFGY-JD94J

1 kg spool of 1.75 mm blue PLA silk filament with ±0.03 mm accuracy, vacuum-sealed with desiccant, prints at 200–220 °C for a high-gloss finish

  • ColorBlue
  • TypeFilament

Color Blue

  • Silk-like gloss finish creates striking visual prints
  • Dimensional accuracy of +/- .03 mm ensures precise extrusion
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • 75 mm diameter works with many popular 3D printers
  • 100 % new high-purity PLA reduces warping and clogging

What the filament is and who it suits

PrintOxe PLA like SILK Blue is a 1.75 mm diameter filament supplied on a 1 kg spool. It targets hobbyists and professionals who want a high-gloss silk finish on decorative prints. The material is a corn-starch-based PLA blend vacuum-sealed with desiccant to resist moisture. Dimensional accuracy is held to +/- .03 mm for consistent extrusion.

Temperature behaviour and everyday handling

Recommended nozzle temperature sits between 200 °C and 220 °C (392 °F to 428 °F). The high-purity formulation reduces shrinkage and warping during normal printing, helping to prevent clogging or blistering. The spool measures 7.88 in diameter by 2.69 in width with a 2.20 in hub hole, fitting most common desktop printers.

Sustained printing performance

During long prints the filament maintains steady flow thanks to its tight .03 mm tolerance and low moisture content from the sealed packaging. The silk texture yields a uniform shiny surface without requiring post-processing. Users who need higher temperature resistance or engineering-grade mechanical properties should choose a different material class.

I korthet

  • Silk-like gloss finish creates striking visual prints
  • Dimensional accuracy of +/- .03 mm ensures precise extrusion
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • 75 mm diameter works with many popular 3D printers
  • 100 % new high-purity PLA reduces warping and clogging

Specifikationer

BrandPrintOxe
ModelPLA like SILK
ColorBlue
TypeFilament

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I load the 1.75 mm spool and what step do people skip?

Mount the spool on the holder, feed the filament into the extruder, then heat the nozzle to 200°C - 220°C and extrude until the new colour flows; people often forget to pre-heat before pushing the filament.

What will need replacing after this 1 Kg roll is used?

The filament itself is consumed during printing; once the 1 Kg spool is empty you simply buy another roll — no other part of the printer wears out from this material.

What is the first quality limit that appears during a long print?

Dimensional accuracy holds to ±0.03 mm, so the first limit you hit is the filament running out after 1 Kg of extrusion.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.