Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Silver PLA silk filament spool vacuum sealed in box

PrintOxe

PrintOxe PLA like SILK Silver 1.75 mm 1 Kg 3d printers accessory

SKU CH-H252-EA5C7

1 kg spool of 1.75 mm PLA silk filament with ±0.03 mm accuracy and 200–220 °C print range

  • ColorSilver
  • TypeFilament

Color Silver

  • Silk-like glossy finish from high-gloss PLA formula
  • Dimensional accuracy of +/- .03 mm for precise prints
  • 75 mm diameter fits most popular 3D printers
  • 1 kg spool vacuum-sealed with desiccant against moisture
  • Prints at 200 °C to 220 °C with low warping

Silver silk PLA filament for desktop 3D printing

PrintOxe supplies a 1-kilogram spool of 1.75-millimetre PLA with a silk surface finish in silver. The material is formulated for a high-gloss appearance on finished prints. It is intended for hobbyists and makers using common fused-deposition printers.

One-kilogram net weight with tight diameter control

The spool delivers 1 kilogram net, vacuum-sealed with desiccant to resist moisture. Dimensional accuracy is held to plus or minus .03 millimetres, reducing the risk of clogging or inconsistent extrusion. The silk additive produces a shiny surface but does not change the basic PLA thermal behaviour.

Standard 1.75-millimetre PLA temperature window

Recommended nozzle temperature ranges from 200 to 220 degrees Celsius (392 to 428 degrees Fahrenheit). Prints will soften above typical PLA glass-transition temperatures, limiting use in high-heat or load-bearing applications. The filament works with most printers that accept 1.75-millimetre spools fitting a 5.59-millimetre hub hole.

I korthet

  • Silk-like glossy finish from high-gloss PLA formula
  • Dimensional accuracy of +/- .03 mm for precise prints
  • 75 mm diameter fits most popular 3D printers
  • 1 kg spool vacuum-sealed with desiccant against moisture
  • Prints at 200 °C to 220 °C with low warping

Specifikationer

BrandPrintOxe
ModelPLA like SILK
ColorSilver
TypeFilament

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 1.75 mm diameter and ±0.03 mm accuracy work reliably with my older Bowden-style printer?

Yes, the filament is manufactured to a 1.75 mm diameter with ±0.03 mm dimensional accuracy, which matches the specification used by most Bowden and direct-drive printers.

How can I verify the silk finish is printing correctly after loading the spool?

Print a temperature tower between 200 °C and 220 °C; a correct silk surface shows a uniform high-gloss sheen with no dull patches or layer lines visible.

Does the 1 kg vacuum-sealed spool include a desiccant pack, or must I buy one separately?

The spool ships vacuum-sealed with a desiccant pack inside the box, so no separate moisture-control purchase is required.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.