Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver PLA silk filament spool vacuum sealed in box

PrintOxe

PrintOxe PLA like SILK Silver 1.75 mm 1 Kg 3d printers accessory

SKU CH-H252-EA5C7

1 kg spool of 1.75 mm PLA silk filament with ±0.03 mm accuracy and 200–220 °C print range

  • ColorSilver
  • TypeFilament

Color Silver

  • Silk-like glossy finish from high-gloss PLA formula
  • Dimensional accuracy of +/- .03 mm for precise prints
  • 75 mm diameter fits most popular 3D printers
  • 1 kg spool vacuum-sealed with desiccant against moisture
  • Prints at 200 °C to 220 °C with low warping

Silver silk PLA filament for desktop 3D printing

PrintOxe supplies a 1-kilogram spool of 1.75-millimetre PLA with a silk surface finish in silver. The material is formulated for a high-gloss appearance on finished prints. It is intended for hobbyists and makers using common fused-deposition printers.

One-kilogram net weight with tight diameter control

The spool delivers 1 kilogram net, vacuum-sealed with desiccant to resist moisture. Dimensional accuracy is held to plus or minus .03 millimetres, reducing the risk of clogging or inconsistent extrusion. The silk additive produces a shiny surface but does not change the basic PLA thermal behaviour.

Standard 1.75-millimetre PLA temperature window

Recommended nozzle temperature ranges from 200 to 220 degrees Celsius (392 to 428 degrees Fahrenheit). Prints will soften above typical PLA glass-transition temperatures, limiting use in high-heat or load-bearing applications. The filament works with most printers that accept 1.75-millimetre spools fitting a 5.59-millimetre hub hole.

Přednosti

  • Silk-like glossy finish from high-gloss PLA formula
  • Dimensional accuracy of +/- .03 mm for precise prints
  • 75 mm diameter fits most popular 3D printers
  • 1 kg spool vacuum-sealed with desiccant against moisture
  • Prints at 200 °C to 220 °C with low warping

Specifikace

BrandPrintOxe
ModelPLA like SILK
ColorSilver
TypeFilament

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 1.75 mm diameter and ±0.03 mm accuracy work reliably with my older Bowden-style printer?

Yes, the filament is manufactured to a 1.75 mm diameter with ±0.03 mm dimensional accuracy, which matches the specification used by most Bowden and direct-drive printers.

How can I verify the silk finish is printing correctly after loading the spool?

Print a temperature tower between 200 °C and 220 °C; a correct silk surface shows a uniform high-gloss sheen with no dull patches or layer lines visible.

Does the 1 kg vacuum-sealed spool include a desiccant pack, or must I buy one separately?

The spool ships vacuum-sealed with a desiccant pack inside the box, so no separate moisture-control purchase is required.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.