Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Metallic gold 1.75 mm PLA filament on a 1 kg spool

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Metallic Gold 3D printers accessory

SKU CH-ZMHX-GZWE7

Metallic gold PLA filament on a 1 kg spool, 1.75 mm diameter with ±0.03 mm tolerance for smooth, low-shrinkage prints on most FDM printers

  • ColorGold
  • TypeFilament

Color Gold

  • Tighter prints from ±0.03 mm diameter tolerance
  • Dry filament ready to print thanks to vacuum-sealed packaging
  • Smooth flow and strong layer adhesion with low-shrinkage PLA Pro
  • Metallic Gold adds premium shine among 37 available colours
  • Works on most 1.75 mm FDM printers including Creality and Bambu

Filament for FDM 3D printers

Ziro 3D PLA Pro filament comes on a 1 kg spool of 1.75 mm metallic gold material. It is made for owners of FDM printers that accept 1.75 mm filament and want consistent results with a biodegradable polymer. The PLA Pro series prints at 190 to 220 °C without a mandatory heated bed.

Vacuum-sealed spool ready to load

Each roll arrives vacuum sealed and wound to be 100 % tangle-free, so it feeds cleanly from the start. The tight ±0.03 mm diameter tolerance keeps line width steady layer after layer. Suggested print speeds range from 30 to 90 mm/s with an optional bed temperature of 50 to 60 °C.

Upgrade from inconsistent or damp filament

This spool replaces filament that varies in thickness, absorbs moisture or tangles on the reel. The jump is worth it when you need repeatable layer adhesion, low shrinkage and a broad palette of 37 colours for functional or decorative parts.

Přednosti

  • Tighter prints from ±0.03 mm diameter tolerance
  • Dry filament ready to print thanks to vacuum-sealed packaging
  • Smooth flow and strong layer adhesion with low-shrinkage PLA Pro
  • Metallic Gold adds premium shine among 37 available colours
  • Works on most 1.75 mm FDM printers including Creality and Bambu

Specifikace

ColorGold
TypeFilament

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What print speed range does the manufacturer suggest for this 1.75mm PLA Pro filament?

The suggested print speed is 30 to 90 mm/s, which helps maintain the ±0.03 mm tolerance during sustained extrusion.

How much does the sealed spool weigh when it arrives, and will that add heat to an enclosed printer?

Gross weight is 1.3 kg including packaging; the filament itself produces no odor and prints at 190–220 °C, adding minimal heat to an enclosure.

Which printer component must already accept 1.75 mm material for this spool to work?

Your FDM printer’s extruder and hot-end must be designed for 1.75 mm filament; the spool fits most Creality, Anycubic, Bambu and similar machines.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.