Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Yellow 1.75 mm PLA filament on a 1 kg spool

Ziro 3D

Ziro 3D PLA PRO Filament 1.75mm 1kg Yellow

SKU CH-VQWJ-DF4Z6

Yellow PLA PRO filament in 1.75 mm diameter on a 1 kg spool with ±0.03 mm tolerance for smooth, low-shrinkage prints

  • ColorYellow
  • TypeFilament

Color Yellow

  • Tight ±0.03 mm tolerance ensures clean layers and consistent extrusion
  • Vacuum-sealed spool arrives dry for reliable prints without moisture issues
  • Low-shrinkage PLA PRO prints smoothly with strong layer adhesion
  • Biodegradable PLA prints at 190-220 °C without a heated bed
  • 1 kg spool provides 330 m of 1.75 mm filament for long projects

Ziro PLA PRO Filament 1.75mm 1kg Yellow

This Ziro 3D PLA PRO filament suits makers who need reliable 1.75mm material for everyday FDM printing. The 1kg spool delivers approximately 330 metres of yellow PLA that works with most printers accepting this diameter, including Creality, Anycubic and Bambu models. Its biodegradable composition prints without odour and does not require a heated bed, making it practical for home or classroom use.

Printing temperature 190 to 220°C optional bed 50

The filament prints cleanly between 190 and 220°C with a suggested speed range of 30 to 90mm/s. A bed temperature of 50 to 60°C is optional thanks to the low-shrinkage formulation that promotes strong layer adhesion. Manufacturing tolerance is held to ±0.03mm so line width stays consistent from layer to layer, and each spool is vacuum-sealed to arrive dry and tangle-free.

Upgrades from inconsistent

Switching to this spool helps when previous rolls suffered from diameter variation, tangling or humidity-related defects that caused under-extrusion or poor bed adhesion. The tight ±0.03mm tolerance and airtight packaging remove those variables, so the improvement is clear on functional parts or visual models where surface quality matters. It will not help if your project demands high-temperature resistance, engineering-grade strength or specialised composites.

Přednosti

  • Tight ±0.03 mm tolerance ensures clean layers and consistent extrusion
  • Vacuum-sealed spool arrives dry for reliable prints without moisture issues
  • Low-shrinkage PLA PRO prints smoothly with strong layer adhesion
  • Biodegradable PLA prints at 190-220 °C without a heated bed
  • 1 kg spool provides 330 m of 1.75 mm filament for long projects

Specifikace

ColorYellow
TypeFilament

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I load the 1.75 mm filament without creating a tangle on the 1 kg spool?

Mount the spool so it unwinds counter-clockwise, keep tension while feeding into the extruder, and never let the free end go slack — the factory winding is 100 % tangle-free but a loose loop will snarl.

When should I replace a roll that has absorbed moisture?

If extrusion becomes inconsistent or you hear popping, dry the spool at 50–60 °C for several hours; the vacuum-sealed bag and desiccant keep it print-ready until opened.

At what print speed does dimensional accuracy start to drift beyond the ±0.03 mm tolerance?

Stay within the suggested 30–90 mm/s range; pushing past 90 mm/s typically shows the first layer-width variation on this PLA PRO formulation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.