Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Metallic gold 1.75 mm PLA filament on a 1 kg spool

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Metallic Gold 3D printers accessory

SKU CH-ZMHX-GZWE7

Metallic gold PLA filament on a 1 kg spool, 1.75 mm diameter with ±0.03 mm tolerance for smooth, low-shrinkage prints on most FDM printers

  • ColorGold
  • TypeFilament

Color Gold

  • Tighter prints from ±0.03 mm diameter tolerance
  • Dry filament ready to print thanks to vacuum-sealed packaging
  • Smooth flow and strong layer adhesion with low-shrinkage PLA Pro
  • Metallic Gold adds premium shine among 37 available colours
  • Works on most 1.75 mm FDM printers including Creality and Bambu

Filament for FDM 3D printers

Ziro 3D PLA Pro filament comes on a 1 kg spool of 1.75 mm metallic gold material. It is made for owners of FDM printers that accept 1.75 mm filament and want consistent results with a biodegradable polymer. The PLA Pro series prints at 190 to 220 °C without a mandatory heated bed.

Vacuum-sealed spool ready to load

Each roll arrives vacuum sealed and wound to be 100 % tangle-free, so it feeds cleanly from the start. The tight ±0.03 mm diameter tolerance keeps line width steady layer after layer. Suggested print speeds range from 30 to 90 mm/s with an optional bed temperature of 50 to 60 °C.

Upgrade from inconsistent or damp filament

This spool replaces filament that varies in thickness, absorbs moisture or tangles on the reel. The jump is worth it when you need repeatable layer adhesion, low shrinkage and a broad palette of 37 colours for functional or decorative parts.

Puntos fuertes

  • Tighter prints from ±0.03 mm diameter tolerance
  • Dry filament ready to print thanks to vacuum-sealed packaging
  • Smooth flow and strong layer adhesion with low-shrinkage PLA Pro
  • Metallic Gold adds premium shine among 37 available colours
  • Works on most 1.75 mm FDM printers including Creality and Bambu

Especificaciones

ColorGold
TypeFilament

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

What print speed range does the manufacturer suggest for this 1.75mm PLA Pro filament?

The suggested print speed is 30 to 90 mm/s, which helps maintain the ±0.03 mm tolerance during sustained extrusion.

How much does the sealed spool weigh when it arrives, and will that add heat to an enclosed printer?

Gross weight is 1.3 kg including packaging; the filament itself produces no odor and prints at 190–220 °C, adding minimal heat to an enclosure.

Which printer component must already accept 1.75 mm material for this spool to work?

Your FDM printer’s extruder and hot-end must be designed for 1.75 mm filament; the spool fits most Creality, Anycubic, Bambu and similar machines.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.