Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Silver PLA silk filament spool vacuum sealed in box

PrintOxe

PrintOxe PLA like SILK Silver 1.75 mm 1 Kg 3d printers accessory

SKU CH-H252-EA5C7

1 kg spool of 1.75 mm PLA silk filament with ±0.03 mm accuracy and 200–220 °C print range

  • ColorSilver
  • TypeFilament

Color Silver

  • Silk-like glossy finish from high-gloss PLA formula
  • Dimensional accuracy of +/- .03 mm for precise prints
  • 75 mm diameter fits most popular 3D printers
  • 1 kg spool vacuum-sealed with desiccant against moisture
  • Prints at 200 °C to 220 °C with low warping

Silver silk PLA filament for desktop 3D printing

PrintOxe supplies a 1-kilogram spool of 1.75-millimetre PLA with a silk surface finish in silver. The material is formulated for a high-gloss appearance on finished prints. It is intended for hobbyists and makers using common fused-deposition printers.

One-kilogram net weight with tight diameter control

The spool delivers 1 kilogram net, vacuum-sealed with desiccant to resist moisture. Dimensional accuracy is held to plus or minus .03 millimetres, reducing the risk of clogging or inconsistent extrusion. The silk additive produces a shiny surface but does not change the basic PLA thermal behaviour.

Standard 1.75-millimetre PLA temperature window

Recommended nozzle temperature ranges from 200 to 220 degrees Celsius (392 to 428 degrees Fahrenheit). Prints will soften above typical PLA glass-transition temperatures, limiting use in high-heat or load-bearing applications. The filament works with most printers that accept 1.75-millimetre spools fitting a 5.59-millimetre hub hole.

Points forts

  • Silk-like glossy finish from high-gloss PLA formula
  • Dimensional accuracy of +/- .03 mm for precise prints
  • 75 mm diameter fits most popular 3D printers
  • 1 kg spool vacuum-sealed with desiccant against moisture
  • Prints at 200 °C to 220 °C with low warping

Caractéristiques

BrandPrintOxe
ModelPLA like SILK
ColorSilver
TypeFilament

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will the 1.75 mm diameter and ±0.03 mm accuracy work reliably with my older Bowden-style printer?

Yes, the filament is manufactured to a 1.75 mm diameter with ±0.03 mm dimensional accuracy, which matches the specification used by most Bowden and direct-drive printers.

How can I verify the silk finish is printing correctly after loading the spool?

Print a temperature tower between 200 °C and 220 °C; a correct silk surface shows a uniform high-gloss sheen with no dull patches or layer lines visible.

Does the 1 kg vacuum-sealed spool include a desiccant pack, or must I buy one separately?

The spool ships vacuum-sealed with a desiccant pack inside the box, so no separate moisture-control purchase is required.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.