Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Silver PLA silk filament spool vacuum sealed in box

PrintOxe

PrintOxe PLA like SILK Silver 1.75 mm 1 Kg 3d printers accessory

SKU CH-H252-EA5C7

1 kg spool of 1.75 mm PLA silk filament with ±0.03 mm accuracy and 200–220 °C print range

  • ColorSilver
  • TypeFilament

Color Silver

  • Silk-like glossy finish from high-gloss PLA formula
  • Dimensional accuracy of +/- .03 mm for precise prints
  • 75 mm diameter fits most popular 3D printers
  • 1 kg spool vacuum-sealed with desiccant against moisture
  • Prints at 200 °C to 220 °C with low warping

Silver silk PLA filament for desktop 3D printing

PrintOxe supplies a 1-kilogram spool of 1.75-millimetre PLA with a silk surface finish in silver. The material is formulated for a high-gloss appearance on finished prints. It is intended for hobbyists and makers using common fused-deposition printers.

One-kilogram net weight with tight diameter control

The spool delivers 1 kilogram net, vacuum-sealed with desiccant to resist moisture. Dimensional accuracy is held to plus or minus .03 millimetres, reducing the risk of clogging or inconsistent extrusion. The silk additive produces a shiny surface but does not change the basic PLA thermal behaviour.

Standard 1.75-millimetre PLA temperature window

Recommended nozzle temperature ranges from 200 to 220 degrees Celsius (392 to 428 degrees Fahrenheit). Prints will soften above typical PLA glass-transition temperatures, limiting use in high-heat or load-bearing applications. The filament works with most printers that accept 1.75-millimetre spools fitting a 5.59-millimetre hub hole.

Öne çıkanlar

  • Silk-like glossy finish from high-gloss PLA formula
  • Dimensional accuracy of +/- .03 mm for precise prints
  • 75 mm diameter fits most popular 3D printers
  • 1 kg spool vacuum-sealed with desiccant against moisture
  • Prints at 200 °C to 220 °C with low warping

Teknik özellikler

BrandPrintOxe
ModelPLA like SILK
ColorSilver
TypeFilament

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will the 1.75 mm diameter and ±0.03 mm accuracy work reliably with my older Bowden-style printer?

Yes, the filament is manufactured to a 1.75 mm diameter with ±0.03 mm dimensional accuracy, which matches the specification used by most Bowden and direct-drive printers.

How can I verify the silk finish is printing correctly after loading the spool?

Print a temperature tower between 200 °C and 220 °C; a correct silk surface shows a uniform high-gloss sheen with no dull patches or layer lines visible.

Does the 1 kg vacuum-sealed spool include a desiccant pack, or must I buy one separately?

The spool ships vacuum-sealed with a desiccant pack inside the box, so no separate moisture-control purchase is required.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.