Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Violet purple PLA silk filament spool in vacuum-sealed box

PrintOxe

PrintOxe PLA like SILK Violet Purple 1.75 mm 1 Kg 3D printer filament

SKU CH-GS67-XHNKK

Silk-texture PLA filament in violet purple delivers a high-gloss finish with ±0.03 mm accuracy on a 1 kg spool

  • ColorPurple
  • TypeFilament

Color Purple

  • Silk texture gives a glossy finish
  • 75 mm diameter with ±0.03 mm accuracy
  • 1 kg spool vacuum sealed with desiccant
  • Prints at 200 °C to 220 °C nozzle temperature
  • Compatible with many popular 3D printers

Filament type and target users

PrintOxe PLA like SILK is a 1.75 mm filament with a silk texture that produces a high-gloss, shiny surface finish. It suits makers who want decorative models with a smooth, reflective appearance. The material is a PLA blend made mainly from corn starch and is described as non-toxic and eco-friendly. Dimensional accuracy is held to +/- .03 mm.

Spool design and daily handling

The spool measures 7.88 inches in diameter, 2.69 inches wide and has a 2.20 inch hub hole, fitting most common desktop printers. Each spool carries 1 kilogram net weight, vacuum-sealed with desiccant inside the box to protect against humidity and moisture. The formulation aims to reduce shrinkage, warping, clogging and blistering during printing.

Temperature window and practical limits

Recommended nozzle temperature ranges from 200°C to 220°C (392°F to 428°F), a relatively narrow band that requires consistent temperature control. The silk finish can highlight layer lines more than matte filaments, so surface imperfections may be more visible. Buyers who need higher heat resistance or mechanical strength should consider materials rated for those properties.

Přednosti

  • Silk texture gives a glossy finish
  • 75 mm diameter with ±0.03 mm accuracy
  • 1 kg spool vacuum sealed with desiccant
  • Prints at 200 °C to 220 °C nozzle temperature
  • Compatible with many popular 3D printers

Specifikace

BrandPrintOxe
ModelPLA like SILK
ColorPurple
TypeFilament

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What dimensional accuracy does the 1.75 mm filament hold?

The filament is manufactured to a tolerance of ±0.03 mm, so the diameter stays within that range during printing.

Will the spool fit on a printer with a 5.59 cm hub hole?

Yes, the spool hub hole measures 5.59 cm (2.20 in), matching that common mounting size.

What nozzle temperature should I set for the first layer to avoid clogging?

Start at 200 °C (392 °F) for the first layer; the full working range is 200–220 °C (392–428 °F).

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.