Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Violet purple PLA silk filament spool in vacuum-sealed box

PrintOxe

PrintOxe PLA like SILK Violet Purple 1.75 mm 1 Kg 3D printer filament

SKU CH-GS67-XHNKK

Silk-texture PLA filament in violet purple delivers a high-gloss finish with ±0.03 mm accuracy on a 1 kg spool

  • ColorPurple
  • TypeFilament

Color Purple

  • Silk texture gives a glossy finish
  • 75 mm diameter with ±0.03 mm accuracy
  • 1 kg spool vacuum sealed with desiccant
  • Prints at 200 °C to 220 °C nozzle temperature
  • Compatible with many popular 3D printers

Filament type and target users

PrintOxe PLA like SILK is a 1.75 mm filament with a silk texture that produces a high-gloss, shiny surface finish. It suits makers who want decorative models with a smooth, reflective appearance. The material is a PLA blend made mainly from corn starch and is described as non-toxic and eco-friendly. Dimensional accuracy is held to +/- .03 mm.

Spool design and daily handling

The spool measures 7.88 inches in diameter, 2.69 inches wide and has a 2.20 inch hub hole, fitting most common desktop printers. Each spool carries 1 kilogram net weight, vacuum-sealed with desiccant inside the box to protect against humidity and moisture. The formulation aims to reduce shrinkage, warping, clogging and blistering during printing.

Temperature window and practical limits

Recommended nozzle temperature ranges from 200°C to 220°C (392°F to 428°F), a relatively narrow band that requires consistent temperature control. The silk finish can highlight layer lines more than matte filaments, so surface imperfections may be more visible. Buyers who need higher heat resistance or mechanical strength should consider materials rated for those properties.

Poudarki

  • Silk texture gives a glossy finish
  • 75 mm diameter with ±0.03 mm accuracy
  • 1 kg spool vacuum sealed with desiccant
  • Prints at 200 °C to 220 °C nozzle temperature
  • Compatible with many popular 3D printers

Specifikacije

BrandPrintOxe
ModelPLA like SILK
ColorPurple
TypeFilament

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What dimensional accuracy does the 1.75 mm filament hold?

The filament is manufactured to a tolerance of ±0.03 mm, so the diameter stays within that range during printing.

Will the spool fit on a printer with a 5.59 cm hub hole?

Yes, the spool hub hole measures 5.59 cm (2.20 in), matching that common mounting size.

What nozzle temperature should I set for the first layer to avoid clogging?

Start at 200 °C (392 °F) for the first layer; the full working range is 200–220 °C (392–428 °F).

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.