暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Violet purple PLA silk filament spool in vacuum-sealed box

PrintOxe

PrintOxe PLA like SILK Violet Purple 1.75 mm 1 Kg 3D printer filament

SKU CH-GS67-XHNKK

Silk-texture PLA filament in violet purple delivers a high-gloss finish with ±0.03 mm accuracy on a 1 kg spool

  • ColorPurple
  • TypeFilament

Color Purple

  • Silk texture gives a glossy finish
  • 75 mm diameter with ±0.03 mm accuracy
  • 1 kg spool vacuum sealed with desiccant
  • Prints at 200 °C to 220 °C nozzle temperature
  • Compatible with many popular 3D printers

Filament type and target users

PrintOxe PLA like SILK is a 1.75 mm filament with a silk texture that produces a high-gloss, shiny surface finish. It suits makers who want decorative models with a smooth, reflective appearance. The material is a PLA blend made mainly from corn starch and is described as non-toxic and eco-friendly. Dimensional accuracy is held to +/- .03 mm.

Spool design and daily handling

The spool measures 7.88 inches in diameter, 2.69 inches wide and has a 2.20 inch hub hole, fitting most common desktop printers. Each spool carries 1 kilogram net weight, vacuum-sealed with desiccant inside the box to protect against humidity and moisture. The formulation aims to reduce shrinkage, warping, clogging and blistering during printing.

Temperature window and practical limits

Recommended nozzle temperature ranges from 200°C to 220°C (392°F to 428°F), a relatively narrow band that requires consistent temperature control. The silk finish can highlight layer lines more than matte filaments, so surface imperfections may be more visible. Buyers who need higher heat resistance or mechanical strength should consider materials rated for those properties.

特長

  • Silk texture gives a glossy finish
  • 75 mm diameter with ±0.03 mm accuracy
  • 1 kg spool vacuum sealed with desiccant
  • Prints at 200 °C to 220 °C nozzle temperature
  • Compatible with many popular 3D printers

仕様

BrandPrintOxe
ModelPLA like SILK
ColorPurple
TypeFilament

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What dimensional accuracy does the 1.75 mm filament hold?

The filament is manufactured to a tolerance of ±0.03 mm, so the diameter stays within that range during printing.

Will the spool fit on a printer with a 5.59 cm hub hole?

Yes, the spool hub hole measures 5.59 cm (2.20 in), matching that common mounting size.

What nozzle temperature should I set for the first layer to avoid clogging?

Start at 200 °C (392 °F) for the first layer; the full working range is 200–220 °C (392–428 °F).

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。