暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue silk PLA filament spool, 1.75 mm, 1 kg, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA Silk Copper Blue Filament 1.75 mm 1 kg +/- .03 mm

SKU CH-G74Z-7XBSV

1.75 mm silk PLA filament on a 1 kg spool with ±0.03 mm accuracy for glossy copper-blue prints

  • ColorBLUE
  • TypeFilament

Color Copper

  • Silk-copper finish creates a high-gloss, shiny surface on prints
  • Dimensional accuracy held to +/- .03 mm for consistent extrusion
  • Vacuum-sealed spool with desiccant protects the 1 kg filament from moisture
  • Prints at 200°C to 220°C with low shrinkage and minimal warping
  • Compatible with popular 1.75 mm printers including MakerBot, RepRap, Flashforge and others

Silk Copper Blue PLA Filament

This PrintOxe filament is a 1.75 mm PLA material with a silk texture that produces a high-gloss copper-blue finish. It comes as a 1 kg net spool vacuum-sealed with desiccant to protect against humidity. The dimensional accuracy is held to +/- .03 mm for consistent extrusion. It is made from 100% new high-purity corn-starch-based material.

Makers wanting a glossy metallic look

The silk formula suits hobbyists and designers who want shiny, decorative parts without post-processing. The PLA base prints at lower temperatures and warps less than many alternatives. Builders who need high-temperature resistance, mechanical strength, or a matte surface should consider other material types.

Steady printing at 200 to 220 °C

The recommended nozzle range of 200°C to 220°C (392°F to 428°F) keeps flow stable during long prints. The tight diameter tolerance reduces the risk of clogging or blistering over extended runs. Low shrinkage and minimal warping help large models stay dimensionally accurate from first layer to last.

特長

  • Silk-copper finish creates a high-gloss, shiny surface on prints
  • Dimensional accuracy held to +/- .03 mm for consistent extrusion
  • Vacuum-sealed spool with desiccant protects the 1 kg filament from moisture
  • Prints at 200°C to 220°C with low shrinkage and minimal warping
  • Compatible with popular 1.75 mm printers including MakerBot, RepRap, Flashforge and others

仕様

BrandPrintOxe
ColorBLUE
TypeFilament

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my printer need a 1.75 mm filament path to use this spool?

Yes, the filament is 1.75 mm diameter with a dimensional accuracy of +/- .03 mm, so the printer must accept 1.75 mm material.

Will this spool fit on a printer that uses a 2.20 inch hub hole?

The spool hub hole is 2.20 inches (5.59 cm), matching many common printers; verify your holder accepts that size.

How can I confirm the filament is printing correctly after loading it?

Extrude at 200°C–220°C (392°F–428°F); a smooth, glossy copper-blue finish with no clogging or blistering shows it is working as intended.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。