نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Blue silk PLA filament spool, 1.75 mm, 1 kg, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA Silk Copper Blue Filament 1.75 mm 1 kg +/- .03 mm

SKU CH-G74Z-7XBSV

1.75 mm silk PLA filament on a 1 kg spool with ±0.03 mm accuracy for glossy copper-blue prints

  • ColorBLUE
  • TypeFilament

Color Copper

  • Silk-copper finish creates a high-gloss, shiny surface on prints
  • Dimensional accuracy held to +/- .03 mm for consistent extrusion
  • Vacuum-sealed spool with desiccant protects the 1 kg filament from moisture
  • Prints at 200°C to 220°C with low shrinkage and minimal warping
  • Compatible with popular 1.75 mm printers including MakerBot, RepRap, Flashforge and others

Silk Copper Blue PLA Filament

This PrintOxe filament is a 1.75 mm PLA material with a silk texture that produces a high-gloss copper-blue finish. It comes as a 1 kg net spool vacuum-sealed with desiccant to protect against humidity. The dimensional accuracy is held to +/- .03 mm for consistent extrusion. It is made from 100% new high-purity corn-starch-based material.

Makers wanting a glossy metallic look

The silk formula suits hobbyists and designers who want shiny, decorative parts without post-processing. The PLA base prints at lower temperatures and warps less than many alternatives. Builders who need high-temperature resistance, mechanical strength, or a matte surface should consider other material types.

Steady printing at 200 to 220 °C

The recommended nozzle range of 200°C to 220°C (392°F to 428°F) keeps flow stable during long prints. The tight diameter tolerance reduces the risk of clogging or blistering over extended runs. Low shrinkage and minimal warping help large models stay dimensionally accurate from first layer to last.

أبرز المميزات

  • Silk-copper finish creates a high-gloss, shiny surface on prints
  • Dimensional accuracy held to +/- .03 mm for consistent extrusion
  • Vacuum-sealed spool with desiccant protects the 1 kg filament from moisture
  • Prints at 200°C to 220°C with low shrinkage and minimal warping
  • Compatible with popular 1.75 mm printers including MakerBot, RepRap, Flashforge and others

المواصفات

BrandPrintOxe
ColorBLUE
TypeFilament

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does my printer need a 1.75 mm filament path to use this spool?

Yes, the filament is 1.75 mm diameter with a dimensional accuracy of +/- .03 mm, so the printer must accept 1.75 mm material.

Will this spool fit on a printer that uses a 2.20 inch hub hole?

The spool hub hole is 2.20 inches (5.59 cm), matching many common printers; verify your holder accepts that size.

How can I confirm the filament is printing correctly after loading it?

Extrude at 200°C–220°C (392°F–428°F); a smooth, glossy copper-blue finish with no clogging or blistering shows it is working as intended.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.