暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Orange silk PLA filament on a plastic spool

PrintOxe

PrintOxe PLA like SILK Orange 1.75 mm 1 kg 3D printer filament

SKU CH-042G-XS8BS

1.75 mm orange PLA silk filament on a 1 kg vacuum-sealed spool with ±.03 mm accuracy, printing at 200-220 °C for a high-gloss finish

  • ColorOrange
  • TypeFilament

Color Orange

  • Silk-like glossy finish from PLA silk formulation
  • Precise 1.75 mm diameter with ± .03 mm accuracy
  • Low-warp, clog-free printing using 100 % high-purity corn-starch material
  • Vacuum-sealed 1 kg spool with desiccant for moisture protection
  • Wide printer compatibility at 200 °C – 220 °C nozzle temperature

PrintOxe Silk Orange Filament 1.75 mm

This 1 kg spool delivers a high-gloss silk finish on every print. The material is a PLA blend made from corn starch and is non-toxic. Dimensional accuracy is held to ±0.03 mm for consistent extrusion. It suits makers who want shiny, decorative parts without post-processing.

Check printer temperature and spool fit

Verify that your hot end can reach 200 °C to 220 °C for reliable flow. The spool measures 7.88 inches in diameter and 2.69 inches wide with a 2.20 inch centre hole. Ensure your holder accommodates these dimensions before ordering. Vacuum-sealed packaging with desiccant keeps the filament dry until use.

Stable output during long prints

The tight diameter tolerance reduces the risk of clogging or blistering over extended runs. Low shrinkage and minimal warping keep layers aligned on large models. Consistent gloss is maintained from the first layer to the last. Makers needing a matte surface or higher heat resistance should choose a different filament type.

特長

  • Silk-like glossy finish from PLA silk formulation
  • Precise 1.75 mm diameter with ± .03 mm accuracy
  • Low-warp, clog-free printing using 100 % high-purity corn-starch material
  • Vacuum-sealed 1 kg spool with desiccant for moisture protection
  • Wide printer compatibility at 200 °C – 220 °C nozzle temperature

仕様

BrandPrintOxe
ModelPLA like SILK
ColorOrange
TypeFilament

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 1 kg spool include anything besides the filament itself?

The 1 kg net filament arrives vacuum-sealed with desiccant inside a retail box; no tools or adhesives are included.

Is the 1.75 mm diameter the only size offered for this Silk Orange PLA?

The listed product is 1.75 mm diameter with ±0.03 mm accuracy; no other diameters are mentioned for this variant.

What nozzle temperature range should I set for the recommended 200 °C to 220 °C extrusion window?

Set the hot-end between 200 °C and 220 °C (392 °F to 428 °F) for reliable flow and the advertised silk finish.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。