Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Orange silk PLA filament on a plastic spool

PrintOxe

PrintOxe PLA like SILK Orange 1.75 mm 1 kg 3D printer filament

SKU CH-042G-XS8BS

1.75 mm orange PLA silk filament on a 1 kg vacuum-sealed spool with ±.03 mm accuracy, printing at 200-220 °C for a high-gloss finish

  • ColorOrange
  • TypeFilament

Color Orange

  • Blue
  • Green
  • Purple
  • Red
  • Silver
  • White
  • Yellow
  • Orange
  • Copper

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Silk-like glossy finish from PLA silk formulation
  • Precise 1.75 mm diameter with ± .03 mm accuracy
  • Low-warp, clog-free printing using 100 % high-purity corn-starch material
  • Vacuum-sealed 1 kg spool with desiccant for moisture protection
  • Wide printer compatibility at 200 °C – 220 °C nozzle temperature

PrintOxe Silk Orange Filament 1.75 mm

This 1 kg spool delivers a high-gloss silk finish on every print. The material is a PLA blend made from corn starch and is non-toxic. Dimensional accuracy is held to ±0.03 mm for consistent extrusion. It suits makers who want shiny, decorative parts without post-processing.

Check printer temperature and spool fit

Verify that your hot end can reach 200 °C to 220 °C for reliable flow. The spool measures 7.88 inches in diameter and 2.69 inches wide with a 2.20 inch centre hole. Ensure your holder accommodates these dimensions before ordering. Vacuum-sealed packaging with desiccant keeps the filament dry until use.

Stable output during long prints

The tight diameter tolerance reduces the risk of clogging or blistering over extended runs. Low shrinkage and minimal warping keep layers aligned on large models. Consistent gloss is maintained from the first layer to the last. Makers needing a matte surface or higher heat resistance should choose a different filament type.

Pluspunten

  • Silk-like glossy finish from PLA silk formulation
  • Precise 1.75 mm diameter with ± .03 mm accuracy
  • Low-warp, clog-free printing using 100 % high-purity corn-starch material
  • Vacuum-sealed 1 kg spool with desiccant for moisture protection
  • Wide printer compatibility at 200 °C – 220 °C nozzle temperature

Specificaties

BrandPrintOxe
ModelPLA like SILK
ColorOrange
TypeFilament

Vragen over dit artikel

Does the 1 kg spool include anything besides the filament itself?

The 1 kg net filament arrives vacuum-sealed with desiccant inside a retail box; no tools or adhesives are included.

Is the 1.75 mm diameter the only size offered for this Silk Orange PLA?

The listed product is 1.75 mm diameter with ±0.03 mm accuracy; no other diameters are mentioned for this variant.

What nozzle temperature range should I set for the recommended 200 °C to 220 °C extrusion window?

Set the hot-end between 200 °C and 220 °C (392 °F to 428 °F) for reliable flow and the advertised silk finish.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.