暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Yellow PLA Silk filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA like SILK Yellow 1.75 mm 1 Kg 3d printers accessory

SKU CH-CQ6C-11D3B

1.75 mm yellow PLA-like silk filament on a 1 kg vacuum-sealed spool with ±0.03 mm accuracy for glossy prints

  • ColorYellow
  • TypePLA like SILK

Color Yellow

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

PrintOxe PLA Silk Yellow 1 kg

This 1 kg spool of 1.75 mm PLA like SILK filament suits makers who want a high-gloss, silk-texture finish on decorative prints. The yellow colour delivers a shiny surface straight from the nozzle without post-processing. It is vacuum-sealed with desiccant to resist moisture during storage.

Fits standard 1.75 mm bowden

The 20.015 cm spool diameter and 5.59 cm hub hole match common holder sizes, while the 6.83 cm width keeps the coil compact. Dimensional accuracy of +/- 0.03 mm reduces the risk of jams and lets the extruder push consistent flow. No heated bed is required for adhesion.

Extrusion window 200 °C to 220 °C

Within this range the corn-starch based material maintains steady layer bonding during long prints, minimising warping and shrinkage. The non-toxic formula avoids clogging or blistering even on extended runs, so surface gloss stays uniform from first layer to last.

特長

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

仕様

BrandPrintOxe
ColorYellow
TypePLA like SILK

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How does the ±0.03 mm dimensional accuracy affect extrusion consistency during long prints?

The tight tolerance keeps filament diameter stable, reducing the risk of under- or over-extrusion that can appear after many hours of continuous printing.

What heat buildup should I expect in the hot-end when running at 200–220 °C for extended periods?

The filament melts cleanly in the recommended 200–220 °C range, so the hot-end only needs to maintain that steady temperature without extra cooling measures.

Which spool dimensions must match my printer's filament holder for this 1 kg roll to feed correctly?

The spool measures 7.88″ diameter, 2.69″ width and has a 2.20″ hub hole — verify your holder accommodates those dimensions.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。