Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Yellow PLA Silk filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA like SILK Yellow 1.75 mm 1 Kg 3d printers accessory

SKU CH-CQ6C-11D3B

1.75 mm yellow PLA-like silk filament on a 1 kg vacuum-sealed spool with ±0.03 mm accuracy for glossy prints

  • ColorYellow
  • TypePLA like SILK

Color Yellow

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

PrintOxe PLA Silk Yellow 1 kg

This 1 kg spool of 1.75 mm PLA like SILK filament suits makers who want a high-gloss, silk-texture finish on decorative prints. The yellow colour delivers a shiny surface straight from the nozzle without post-processing. It is vacuum-sealed with desiccant to resist moisture during storage.

Fits standard 1.75 mm bowden

The 20.015 cm spool diameter and 5.59 cm hub hole match common holder sizes, while the 6.83 cm width keeps the coil compact. Dimensional accuracy of +/- 0.03 mm reduces the risk of jams and lets the extruder push consistent flow. No heated bed is required for adhesion.

Extrusion window 200 °C to 220 °C

Within this range the corn-starch based material maintains steady layer bonding during long prints, minimising warping and shrinkage. The non-toxic formula avoids clogging or blistering even on extended runs, so surface gloss stays uniform from first layer to last.

Puncte forte

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

Specificații

BrandPrintOxe
ColorYellow
TypePLA like SILK

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How does the ±0.03 mm dimensional accuracy affect extrusion consistency during long prints?

The tight tolerance keeps filament diameter stable, reducing the risk of under- or over-extrusion that can appear after many hours of continuous printing.

What heat buildup should I expect in the hot-end when running at 200–220 °C for extended periods?

The filament melts cleanly in the recommended 200–220 °C range, so the hot-end only needs to maintain that steady temperature without extra cooling measures.

Which spool dimensions must match my printer's filament holder for this 1 kg roll to feed correctly?

The spool measures 7.88″ diameter, 2.69″ width and has a 2.20″ hub hole — verify your holder accommodates those dimensions.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.