Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
White silk PLA filament spool, 1.75 mm diameter, 1 kg net weight

PrintOxe

PrintOxe PLA like SILK White 1.75 mm 1 Kg 3D printers accessory

SKU CH-24D4-BKCY3

White silk-finish PLA filament, 1.75 mm diameter, 1 kg spool with ±.03 mm accuracy for glossy prints

  • ColorWhite
  • TypeFilament

Color White

  • Silk texture delivers a glossy, shiny surface finish
  • Dimensional accuracy of +/- .03 mm ensures precise extrusion
  • 75 mm diameter fits most popular desktop 3D printers
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Prints at 200 °C to 220 °C for reliable layer adhesion

1 kg Silk PLA Filament

PrintOxe PLA like SILK White is a 1.75 mm diameter filament supplied on a 1 kg spool. The material uses a high-gloss silk formula that produces a shiny surface finish on printed parts. It is vacuum-sealed with desiccant to protect against moisture. Dimensional accuracy is held to +/- 0.03 mm for consistent extrusion.

Suits FDM printers using 1.75 mm PLA

This filament works with many popular FDM printers including MakerBot, Reprap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC and MakerGear M2. The recommended nozzle temperature range is 200°C to 220°C. Builders needing a different diameter, a higher temperature material, or a larger spool size should look at other products.

+/- 0.03 mm dimensional accuracy

The +/- 0.03 mm tolerance is the key specification that determines whether this filament will feed reliably in a given extruder. Tight diameter control reduces the risk of jams and helps maintain steady flow rates. If a printer requires tighter or looser tolerances, this figure decides compatibility.

Puncte forte

  • Silk texture delivers a glossy, shiny surface finish
  • Dimensional accuracy of +/- .03 mm ensures precise extrusion
  • 75 mm diameter fits most popular desktop 3D printers
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Prints at 200 °C to 220 °C for reliable layer adhesion

Specificații

BrandPrintOxe
ModelPLA like SILK
ColorWhite
TypeFilament

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the 1.75 mm filament need active cooling or an enclosure when printing for hours?

PLA like SILK prints at 200 °C to 220 °C and is designed for minimal warping, so a standard part-cooling fan is usually enough; an enclosure is not required.

My printer uses a 2.20 inch hub hole — will this spool fit?

The spool hub hole is 2.20 inches (5.59 cm), matching many common printers; check your holder width against the 2.69 inch (6.83 cm) spool width.

Will the +/- 0.03 mm tolerance work reliably on my older Bowden setup?

The tight 0.03 mm diameter accuracy reduces extrusion variance, helping older Bowden printers avoid clogging and under-extrusion.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.