Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
White silk PLA filament spool, 1.75 mm diameter, 1 kg net weight

PrintOxe

PrintOxe PLA like SILK White 1.75 mm 1 Kg 3D printers accessory

SKU CH-24D4-BKCY3

White silk-finish PLA filament, 1.75 mm diameter, 1 kg spool with ±.03 mm accuracy for glossy prints

  • ColorWhite
  • TypeFilament

Color White

  • Silk texture delivers a glossy, shiny surface finish
  • Dimensional accuracy of +/- .03 mm ensures precise extrusion
  • 75 mm diameter fits most popular desktop 3D printers
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Prints at 200 °C to 220 °C for reliable layer adhesion

1 kg Silk PLA Filament

PrintOxe PLA like SILK White is a 1.75 mm diameter filament supplied on a 1 kg spool. The material uses a high-gloss silk formula that produces a shiny surface finish on printed parts. It is vacuum-sealed with desiccant to protect against moisture. Dimensional accuracy is held to +/- 0.03 mm for consistent extrusion.

Suits FDM printers using 1.75 mm PLA

This filament works with many popular FDM printers including MakerBot, Reprap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC and MakerGear M2. The recommended nozzle temperature range is 200°C to 220°C. Builders needing a different diameter, a higher temperature material, or a larger spool size should look at other products.

+/- 0.03 mm dimensional accuracy

The +/- 0.03 mm tolerance is the key specification that determines whether this filament will feed reliably in a given extruder. Tight diameter control reduces the risk of jams and helps maintain steady flow rates. If a printer requires tighter or looser tolerances, this figure decides compatibility.

Акценти

  • Silk texture delivers a glossy, shiny surface finish
  • Dimensional accuracy of +/- .03 mm ensures precise extrusion
  • 75 mm diameter fits most popular desktop 3D printers
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Prints at 200 °C to 220 °C for reliable layer adhesion

Спецификации

BrandPrintOxe
ModelPLA like SILK
ColorWhite
TypeFilament

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Does the 1.75 mm filament need active cooling or an enclosure when printing for hours?

PLA like SILK prints at 200 °C to 220 °C and is designed for minimal warping, so a standard part-cooling fan is usually enough; an enclosure is not required.

My printer uses a 2.20 inch hub hole — will this spool fit?

The spool hub hole is 2.20 inches (5.59 cm), matching many common printers; check your holder width against the 2.69 inch (6.83 cm) spool width.

Will the +/- 0.03 mm tolerance work reliably on my older Bowden setup?

The tight 0.03 mm diameter accuracy reduces extrusion variance, helping older Bowden printers avoid clogging and under-extrusion.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.