Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Yellow PLA Silk filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA like SILK Yellow 1.75 mm 1 Kg 3d printers accessory

SKU CH-CQ6C-11D3B

1.75 mm yellow PLA-like silk filament on a 1 kg vacuum-sealed spool with ±0.03 mm accuracy for glossy prints

  • ColorYellow
  • TypePLA like SILK

Color Yellow

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

PrintOxe PLA Silk Yellow 1 kg

This 1 kg spool of 1.75 mm PLA like SILK filament suits makers who want a high-gloss, silk-texture finish on decorative prints. The yellow colour delivers a shiny surface straight from the nozzle without post-processing. It is vacuum-sealed with desiccant to resist moisture during storage.

Fits standard 1.75 mm bowden

The 20.015 cm spool diameter and 5.59 cm hub hole match common holder sizes, while the 6.83 cm width keeps the coil compact. Dimensional accuracy of +/- 0.03 mm reduces the risk of jams and lets the extruder push consistent flow. No heated bed is required for adhesion.

Extrusion window 200 °C to 220 °C

Within this range the corn-starch based material maintains steady layer bonding during long prints, minimising warping and shrinkage. The non-toxic formula avoids clogging or blistering even on extended runs, so surface gloss stays uniform from first layer to last.

Prednosti

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

Špecifikácie

BrandPrintOxe
ColorYellow
TypePLA like SILK

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How does the ±0.03 mm dimensional accuracy affect extrusion consistency during long prints?

The tight tolerance keeps filament diameter stable, reducing the risk of under- or over-extrusion that can appear after many hours of continuous printing.

What heat buildup should I expect in the hot-end when running at 200–220 °C for extended periods?

The filament melts cleanly in the recommended 200–220 °C range, so the hot-end only needs to maintain that steady temperature without extra cooling measures.

Which spool dimensions must match my printer's filament holder for this 1 kg roll to feed correctly?

The spool measures 7.88″ diameter, 2.69″ width and has a 2.20″ hub hole — verify your holder accommodates those dimensions.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.