Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Yellow PLA Silk filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA like SILK Yellow 1.75 mm 1 Kg 3d printers accessory

SKU CH-CQ6C-11D3B

1.75 mm yellow PLA-like silk filament on a 1 kg vacuum-sealed spool with ±0.03 mm accuracy for glossy prints

  • ColorYellow
  • TypePLA like SILK

Color Yellow

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

PrintOxe PLA Silk Yellow 1 kg

This 1 kg spool of 1.75 mm PLA like SILK filament suits makers who want a high-gloss, silk-texture finish on decorative prints. The yellow colour delivers a shiny surface straight from the nozzle without post-processing. It is vacuum-sealed with desiccant to resist moisture during storage.

Fits standard 1.75 mm bowden

The 20.015 cm spool diameter and 5.59 cm hub hole match common holder sizes, while the 6.83 cm width keeps the coil compact. Dimensional accuracy of +/- 0.03 mm reduces the risk of jams and lets the extruder push consistent flow. No heated bed is required for adhesion.

Extrusion window 200 °C to 220 °C

Within this range the corn-starch based material maintains steady layer bonding during long prints, minimising warping and shrinkage. The non-toxic formula avoids clogging or blistering even on extended runs, so surface gloss stays uniform from first layer to last.

I korthet

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

Specifikationer

BrandPrintOxe
ColorYellow
TypePLA like SILK

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How does the ±0.03 mm dimensional accuracy affect extrusion consistency during long prints?

The tight tolerance keeps filament diameter stable, reducing the risk of under- or over-extrusion that can appear after many hours of continuous printing.

What heat buildup should I expect in the hot-end when running at 200–220 °C for extended periods?

The filament melts cleanly in the recommended 200–220 °C range, so the hot-end only needs to maintain that steady temperature without extra cooling measures.

Which spool dimensions must match my printer's filament holder for this 1 kg roll to feed correctly?

The spool measures 7.88″ diameter, 2.69″ width and has a 2.20″ hub hole — verify your holder accommodates those dimensions.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.