Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Yellow PLA Silk filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA like SILK Yellow 1.75 mm 1 Kg 3d printers accessory

SKU CH-CQ6C-11D3B

1.75 mm yellow PLA-like silk filament on a 1 kg vacuum-sealed spool with ±0.03 mm accuracy for glossy prints

  • ColorYellow
  • TypePLA like SILK

Color Yellow

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

PrintOxe PLA Silk Yellow 1 kg

This 1 kg spool of 1.75 mm PLA like SILK filament suits makers who want a high-gloss, silk-texture finish on decorative prints. The yellow colour delivers a shiny surface straight from the nozzle without post-processing. It is vacuum-sealed with desiccant to resist moisture during storage.

Fits standard 1.75 mm bowden

The 20.015 cm spool diameter and 5.59 cm hub hole match common holder sizes, while the 6.83 cm width keeps the coil compact. Dimensional accuracy of +/- 0.03 mm reduces the risk of jams and lets the extruder push consistent flow. No heated bed is required for adhesion.

Extrusion window 200 °C to 220 °C

Within this range the corn-starch based material maintains steady layer bonding during long prints, minimising warping and shrinkage. The non-toxic formula avoids clogging or blistering even on extended runs, so surface gloss stays uniform from first layer to last.

Helstu kostir

  • High-gloss silk finish produces outstanding shiny surface prints
  • 75 mm diameter with ±.03 mm accuracy ensures consistent extrusion
  • 100 % high-purity PLA from corn starch minimises warping and clogging
  • Vacuum-sealed spool with desiccant protects filament from moisture
  • Compatible with popular printers at 200–220 °C nozzle temperature

Tæknilýsing

BrandPrintOxe
ColorYellow
TypePLA like SILK

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How does the ±0.03 mm dimensional accuracy affect extrusion consistency during long prints?

The tight tolerance keeps filament diameter stable, reducing the risk of under- or over-extrusion that can appear after many hours of continuous printing.

What heat buildup should I expect in the hot-end when running at 200–220 °C for extended periods?

The filament melts cleanly in the recommended 200–220 °C range, so the hot-end only needs to maintain that steady temperature without extra cooling measures.

Which spool dimensions must match my printer's filament holder for this 1 kg roll to feed correctly?

The spool measures 7.88″ diameter, 2.69″ width and has a 2.20″ hub hole — verify your holder accommodates those dimensions.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.