Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Orange silk PLA filament on a plastic spool

PrintOxe

PrintOxe PLA like SILK Orange 1.75 mm 1 kg 3D printer filament

SKU CH-042G-XS8BS

1.75 mm orange PLA silk filament on a 1 kg vacuum-sealed spool with ±.03 mm accuracy, printing at 200-220 °C for a high-gloss finish

  • ColorOrange
  • TypeFilament

Color Orange

  • Blue
  • Green
  • Purple
  • Red
  • Silver
  • White
  • Yellow
  • Orange
  • Copper

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Silk-like glossy finish from PLA silk formulation
  • Precise 1.75 mm diameter with ± .03 mm accuracy
  • Low-warp, clog-free printing using 100 % high-purity corn-starch material
  • Vacuum-sealed 1 kg spool with desiccant for moisture protection
  • Wide printer compatibility at 200 °C – 220 °C nozzle temperature

PrintOxe Silk Orange Filament 1.75 mm

This 1 kg spool delivers a high-gloss silk finish on every print. The material is a PLA blend made from corn starch and is non-toxic. Dimensional accuracy is held to ±0.03 mm for consistent extrusion. It suits makers who want shiny, decorative parts without post-processing.

Check printer temperature and spool fit

Verify that your hot end can reach 200 °C to 220 °C for reliable flow. The spool measures 7.88 inches in diameter and 2.69 inches wide with a 2.20 inch centre hole. Ensure your holder accommodates these dimensions before ordering. Vacuum-sealed packaging with desiccant keeps the filament dry until use.

Stable output during long prints

The tight diameter tolerance reduces the risk of clogging or blistering over extended runs. Low shrinkage and minimal warping keep layers aligned on large models. Consistent gloss is maintained from the first layer to the last. Makers needing a matte surface or higher heat resistance should choose a different filament type.

Helstu kostir

  • Silk-like glossy finish from PLA silk formulation
  • Precise 1.75 mm diameter with ± .03 mm accuracy
  • Low-warp, clog-free printing using 100 % high-purity corn-starch material
  • Vacuum-sealed 1 kg spool with desiccant for moisture protection
  • Wide printer compatibility at 200 °C – 220 °C nozzle temperature

Tæknilýsing

BrandPrintOxe
ModelPLA like SILK
ColorOrange
TypeFilament

Spurningar um þessa vöru

Does the 1 kg spool include anything besides the filament itself?

The 1 kg net filament arrives vacuum-sealed with desiccant inside a retail box; no tools or adhesives are included.

Is the 1.75 mm diameter the only size offered for this Silk Orange PLA?

The listed product is 1.75 mm diameter with ±0.03 mm accuracy; no other diameters are mentioned for this variant.

What nozzle temperature range should I set for the recommended 200 °C to 220 °C extrusion window?

Set the hot-end between 200 °C and 220 °C (392 °F to 428 °F) for reliable flow and the advertised silk finish.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.