Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Violet purple PLA silk filament spool in vacuum-sealed box

PrintOxe

PrintOxe PLA like SILK Violet Purple 1.75 mm 1 Kg 3D printer filament

SKU CH-GS67-XHNKK

Silk-texture PLA filament in violet purple delivers a high-gloss finish with ±0.03 mm accuracy on a 1 kg spool

  • ColorPurple
  • TypeFilament

Color Purple

  • Silk texture gives a glossy finish
  • 75 mm diameter with ±0.03 mm accuracy
  • 1 kg spool vacuum sealed with desiccant
  • Prints at 200 °C to 220 °C nozzle temperature
  • Compatible with many popular 3D printers

Filament type and target users

PrintOxe PLA like SILK is a 1.75 mm filament with a silk texture that produces a high-gloss, shiny surface finish. It suits makers who want decorative models with a smooth, reflective appearance. The material is a PLA blend made mainly from corn starch and is described as non-toxic and eco-friendly. Dimensional accuracy is held to +/- .03 mm.

Spool design and daily handling

The spool measures 7.88 inches in diameter, 2.69 inches wide and has a 2.20 inch hub hole, fitting most common desktop printers. Each spool carries 1 kilogram net weight, vacuum-sealed with desiccant inside the box to protect against humidity and moisture. The formulation aims to reduce shrinkage, warping, clogging and blistering during printing.

Temperature window and practical limits

Recommended nozzle temperature ranges from 200°C to 220°C (392°F to 428°F), a relatively narrow band that requires consistent temperature control. The silk finish can highlight layer lines more than matte filaments, so surface imperfections may be more visible. Buyers who need higher heat resistance or mechanical strength should consider materials rated for those properties.

Priekšrocības

  • Silk texture gives a glossy finish
  • 75 mm diameter with ±0.03 mm accuracy
  • 1 kg spool vacuum sealed with desiccant
  • Prints at 200 °C to 220 °C nozzle temperature
  • Compatible with many popular 3D printers

Specifikācijas

BrandPrintOxe
ModelPLA like SILK
ColorPurple
TypeFilament

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What dimensional accuracy does the 1.75 mm filament hold?

The filament is manufactured to a tolerance of ±0.03 mm, so the diameter stays within that range during printing.

Will the spool fit on a printer with a 5.59 cm hub hole?

Yes, the spool hub hole measures 5.59 cm (2.20 in), matching that common mounting size.

What nozzle temperature should I set for the first layer to avoid clogging?

Start at 200 °C (392 °F) for the first layer; the full working range is 200–220 °C (392–428 °F).

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.