Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Clear translucent PLA+ filament spool 1.75mm diameter 1kg net weight vacuum sealed with desiccant

PrintOxe

PrintOxe PLA+ Pro Translucent Clear Filament 1.75mm 1Kg +/- 0.03mm

SKU CH-Y9B6-8APER

Translucent clear PLA+ filament with ±0.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • Precise prints with ±.03 mm dimensional accuracy
  • Stronger parts thanks to PLA+ formulation with lower shrinkage
  • Reliable feeding from 1 kg vacuum-sealed spool with desiccant
  • Broad printer compatibility at 1.75 mm diameter
  • Clean results using 100 % high-purity, non-toxic material

PrintOxe PLA+ Pro 1.75mm Filament

This 1.75mm PLA+ Pro filament from PrintOxe comes as a 1Kg net spool vacuum-sealed with desiccant for moisture protection. Made from 100% new high-purity material, it offers extra strength, lower shrinkage and strong layer adhesion with minimal warping. Dimensional accuracy is held to +/- .03 mm for consistent feeding.

Makers using 1.75mm FDM printers

Compatible with common FDM printers that accept 1.75mm filament, the spool fits standard hub dimensions of 2.20 inch hole diameter, 7.88 inch flange diameter and 2.69 inch width. Recommended nozzle temperature is 190°C to 200°C (374°F to 392°F). Users needing other diameters or specialty materials such as ABS, PETG or flexible filaments should look elsewhere.

Vacuum-sealed spool with desiccant

The vacuum-sealed packaging with included desiccant keeps the filament dry until opened, reducing the risk of blistering or clogging caused by absorbed moisture. Translucent clear colour delivers a smooth surface finish on printed parts. No additional software, tools or accessories are bundled beyond the sealed spool itself.

Privalumai

  • Precise prints with ±.03 mm dimensional accuracy
  • Stronger parts thanks to PLA+ formulation with lower shrinkage
  • Reliable feeding from 1 kg vacuum-sealed spool with desiccant
  • Broad printer compatibility at 1.75 mm diameter
  • Clean results using 100 % high-purity, non-toxic material

Specifikacijos

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Klausimai apie šią prekę

Which 3D printers accept the 1.75 mm diameter of this PrintOxe PLA+ Pro filament?

The spool works with any FDM printer that uses 1.75 mm filament, including models from Creality, Prusa, Ultimaker, LulzBot, FlashForge and many others.

Will the 20.015 cm spool diameter and 5.59 cm hub hole fit on my printer's existing filament holder?

The spool measures 20.015 cm across with a 5.59 cm centre hole, matching the standard dimensions used by most desktop FDM machines.

How can I verify the filament is feeding correctly after loading it?

Set the nozzle between 190 °C and 200 °C; smooth, bubble-free extrusion with consistent layer adhesion shows the +/- 0.03 mm tolerance is holding.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.