نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Clear translucent PLA+ filament spool 1.75mm diameter 1kg net weight vacuum sealed with desiccant

PrintOxe

PrintOxe PLA+ Pro Translucent Clear Filament 1.75mm 1Kg +/- 0.03mm

SKU CH-Y9B6-8APER

Translucent clear PLA+ filament with ±0.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • Precise prints with ±.03 mm dimensional accuracy
  • Stronger parts thanks to PLA+ formulation with lower shrinkage
  • Reliable feeding from 1 kg vacuum-sealed spool with desiccant
  • Broad printer compatibility at 1.75 mm diameter
  • Clean results using 100 % high-purity, non-toxic material

PrintOxe PLA+ Pro 1.75mm Filament

This 1.75mm PLA+ Pro filament from PrintOxe comes as a 1Kg net spool vacuum-sealed with desiccant for moisture protection. Made from 100% new high-purity material, it offers extra strength, lower shrinkage and strong layer adhesion with minimal warping. Dimensional accuracy is held to +/- .03 mm for consistent feeding.

Makers using 1.75mm FDM printers

Compatible with common FDM printers that accept 1.75mm filament, the spool fits standard hub dimensions of 2.20 inch hole diameter, 7.88 inch flange diameter and 2.69 inch width. Recommended nozzle temperature is 190°C to 200°C (374°F to 392°F). Users needing other diameters or specialty materials such as ABS, PETG or flexible filaments should look elsewhere.

Vacuum-sealed spool with desiccant

The vacuum-sealed packaging with included desiccant keeps the filament dry until opened, reducing the risk of blistering or clogging caused by absorbed moisture. Translucent clear colour delivers a smooth surface finish on printed parts. No additional software, tools or accessories are bundled beyond the sealed spool itself.

أبرز المميزات

  • Precise prints with ±.03 mm dimensional accuracy
  • Stronger parts thanks to PLA+ formulation with lower shrinkage
  • Reliable feeding from 1 kg vacuum-sealed spool with desiccant
  • Broad printer compatibility at 1.75 mm diameter
  • Clean results using 100 % high-purity, non-toxic material

المواصفات

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

أسئلة حول هذا المنتج

Which 3D printers accept the 1.75 mm diameter of this PrintOxe PLA+ Pro filament?

The spool works with any FDM printer that uses 1.75 mm filament, including models from Creality, Prusa, Ultimaker, LulzBot, FlashForge and many others.

Will the 20.015 cm spool diameter and 5.59 cm hub hole fit on my printer's existing filament holder?

The spool measures 20.015 cm across with a 5.59 cm centre hole, matching the standard dimensions used by most desktop FDM machines.

How can I verify the filament is feeding correctly after loading it?

Set the nozzle between 190 °C and 200 °C; smooth, bubble-free extrusion with consistent layer adhesion shows the +/- 0.03 mm tolerance is holding.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.