Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver rectangular 3.5 inch bare hard drive with circuit board visible

Seagate

Seagate ST330013A 30GB 7200 RPM 2MB IDE 3.5" internal hard drive

SKU CH-H4GQ-E1KPB MPN ST330013A

30 GB 7200 RPM IDE hard drive with 2 MB cache for legacy desktop upgrades

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA100 / ATA-6
  • Capacity30GB
  • RPM7200 RPM
  • Cache2MB
  • Average Seek Time9ms
  • 7200 RPM spindle speed accelerates data access
  • 30 GB capacity stores operating system and core applications
  • 2 MB cache buffers frequent read and write requests
  • IDE Ultra ATA100 interface connects to legacy desktop motherboards
  • 5 inch form factor fits standard internal drive bays

Seagate BarraCuda V 30GB IDE hard drive

The Seagate ST330013A is a 30GB 3.5-inch desktop internal hard drive from the BarraCuda V series. It operates at 7200 RPM with a 2MB cache and connects via an IDE Ultra ATA100 / ATA-6 interface. The drive is supplied as a bare unit in new condition.

Suits legacy IDE systems.

This drive suits owners of older desktops or industrial equipment that require a replacement 3.5-inch IDE drive with a 1-inch height profile. The 9ms average seek time supports typical operating system and application loads of the era. Buyers who need more than 30GB of capacity or a modern interface such as Serial ATA cannot use this model.

IDE Ultra ATA100 interface determines compatibility

The single specification that decides fitment is the IDE Ultra ATA100 / ATA-6 interface. The host system must provide a 40-pin IDE connector and support the ATA-6 command set for the drive to function. Without that interface the drive cannot be installed regardless of its physical dimensions.

Privalumai

  • 7200 RPM spindle speed accelerates data access
  • 30 GB capacity stores operating system and core applications
  • 2 MB cache buffers frequent read and write requests
  • IDE Ultra ATA100 interface connects to legacy desktop motherboards
  • 5 inch form factor fits standard internal drive bays

Specifikacijos

BrandSeagate
SeriesBarraCuda V
ModelST330013A
PackagingBare Drive
InterfaceIDE Ultra ATA100 / ATA-6
Capacity30GB
RPM7200 RPM
Cache2MB
Average Seek Time9ms
Form Factor3.5"
Height (maximum)1"
Width (maximum)4"
Length (maximum)5.5"
Siuntos svoris0.68 kg
Pakuotės dydis203 × 152 × 51 mm

Klausimai apie šią prekę

What real-world transfer rate does the IDE Ultra ATA100 interface cap at?

The IDE Ultra ATA100 interface caps at 100 MB/s burst transfer rate.

What physical space does the 3.5 inch form factor with 1 inch height need to fit?

It needs a standard 3.5 inch drive bay measuring at least 5.5 inches long, 4 inches wide and 1 inch high.

How is the bare drive installed, and which jumper step is often missed?

Mount the drive in a 3.5 inch bay, connect the 40-pin IDE cable and 4-pin power, then set the master or slave jumper before powering on.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.