Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver rectangular 3.5 inch bare hard drive with circuit board visible

Seagate

Seagate ST330013A 30GB 7200 RPM 2MB IDE 3.5" internal hard drive

SKU CH-H4GQ-E1KPB MPN ST330013A

30 GB 7200 RPM IDE hard drive with 2 MB cache for legacy desktop upgrades

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA100 / ATA-6
  • Capacity30GB
  • RPM7200 RPM
  • Cache2MB
  • Average Seek Time9ms
  • 7200 RPM spindle speed accelerates data access
  • 30 GB capacity stores operating system and core applications
  • 2 MB cache buffers frequent read and write requests
  • IDE Ultra ATA100 interface connects to legacy desktop motherboards
  • 5 inch form factor fits standard internal drive bays

Seagate BarraCuda V 30GB IDE hard drive

The Seagate ST330013A is a 30GB 3.5-inch desktop internal hard drive from the BarraCuda V series. It operates at 7200 RPM with a 2MB cache and connects via an IDE Ultra ATA100 / ATA-6 interface. The drive is supplied as a bare unit in new condition.

Suits legacy IDE systems.

This drive suits owners of older desktops or industrial equipment that require a replacement 3.5-inch IDE drive with a 1-inch height profile. The 9ms average seek time supports typical operating system and application loads of the era. Buyers who need more than 30GB of capacity or a modern interface such as Serial ATA cannot use this model.

IDE Ultra ATA100 interface determines compatibility

The single specification that decides fitment is the IDE Ultra ATA100 / ATA-6 interface. The host system must provide a 40-pin IDE connector and support the ATA-6 command set for the drive to function. Without that interface the drive cannot be installed regardless of its physical dimensions.

Poudarki

  • 7200 RPM spindle speed accelerates data access
  • 30 GB capacity stores operating system and core applications
  • 2 MB cache buffers frequent read and write requests
  • IDE Ultra ATA100 interface connects to legacy desktop motherboards
  • 5 inch form factor fits standard internal drive bays

Specifikacije

BrandSeagate
SeriesBarraCuda V
ModelST330013A
PackagingBare Drive
InterfaceIDE Ultra ATA100 / ATA-6
Capacity30GB
RPM7200 RPM
Cache2MB
Average Seek Time9ms
Form Factor3.5"
Height (maximum)1"
Width (maximum)4"
Length (maximum)5.5"
Teža pošiljke0.68 kg
Velikost pošiljke203 × 152 × 51 mm

Vprašanja o tem izdelku

What real-world transfer rate does the IDE Ultra ATA100 interface cap at?

The IDE Ultra ATA100 interface caps at 100 MB/s burst transfer rate.

What physical space does the 3.5 inch form factor with 1 inch height need to fit?

It needs a standard 3.5 inch drive bay measuring at least 5.5 inches long, 4 inches wide and 1 inch high.

How is the bare drive installed, and which jumper step is often missed?

Mount the drive in a 3.5 inch bay, connect the 40-pin IDE cable and 4-pin power, then set the master or slave jumper before powering on.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.