نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver rectangular 3.5 inch bare hard drive with circuit board visible

Seagate

Seagate ST330013A 30GB 7200 RPM 2MB IDE 3.5" internal hard drive

SKU CH-H4GQ-E1KPB MPN ST330013A

30 GB 7200 RPM IDE hard drive with 2 MB cache for legacy desktop upgrades

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA100 / ATA-6
  • Capacity30GB
  • RPM7200 RPM
  • Cache2MB
  • Average Seek Time9ms
  • 7200 RPM spindle speed accelerates data access
  • 30 GB capacity stores operating system and core applications
  • 2 MB cache buffers frequent read and write requests
  • IDE Ultra ATA100 interface connects to legacy desktop motherboards
  • 5 inch form factor fits standard internal drive bays

Seagate BarraCuda V 30GB IDE hard drive

The Seagate ST330013A is a 30GB 3.5-inch desktop internal hard drive from the BarraCuda V series. It operates at 7200 RPM with a 2MB cache and connects via an IDE Ultra ATA100 / ATA-6 interface. The drive is supplied as a bare unit in new condition.

Suits legacy IDE systems.

This drive suits owners of older desktops or industrial equipment that require a replacement 3.5-inch IDE drive with a 1-inch height profile. The 9ms average seek time supports typical operating system and application loads of the era. Buyers who need more than 30GB of capacity or a modern interface such as Serial ATA cannot use this model.

IDE Ultra ATA100 interface determines compatibility

The single specification that decides fitment is the IDE Ultra ATA100 / ATA-6 interface. The host system must provide a 40-pin IDE connector and support the ATA-6 command set for the drive to function. Without that interface the drive cannot be installed regardless of its physical dimensions.

أبرز المميزات

  • 7200 RPM spindle speed accelerates data access
  • 30 GB capacity stores operating system and core applications
  • 2 MB cache buffers frequent read and write requests
  • IDE Ultra ATA100 interface connects to legacy desktop motherboards
  • 5 inch form factor fits standard internal drive bays

المواصفات

BrandSeagate
SeriesBarraCuda V
ModelST330013A
PackagingBare Drive
InterfaceIDE Ultra ATA100 / ATA-6
Capacity30GB
RPM7200 RPM
Cache2MB
Average Seek Time9ms
Form Factor3.5"
Height (maximum)1"
Width (maximum)4"
Length (maximum)5.5"
وزن الشحنة0.68 kg
أبعاد الطرد203 × 152 × 51 mm

أسئلة حول هذا المنتج

What real-world transfer rate does the IDE Ultra ATA100 interface cap at?

The IDE Ultra ATA100 interface caps at 100 MB/s burst transfer rate.

What physical space does the 3.5 inch form factor with 1 inch height need to fit?

It needs a standard 3.5 inch drive bay measuring at least 5.5 inches long, 4 inches wide and 1 inch high.

How is the bare drive installed, and which jumper step is often missed?

Mount the drive in a 3.5 inch bay, connect the 40-pin IDE cable and 4-pin power, then set the master or slave jumper before powering on.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.