Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver rectangular 3.5 inch bare hard drive with circuit board visible

Seagate

Seagate ST330013A 30GB 7200 RPM 2MB IDE 3.5" internal hard drive

SKU CH-H4GQ-E1KPB MPN ST330013A

30 GB 7200 RPM IDE hard drive with 2 MB cache for legacy desktop upgrades

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA100 / ATA-6
  • Capacity30GB
  • RPM7200 RPM
  • Cache2MB
  • Average Seek Time9ms
  • 7200 RPM spindle speed accelerates data access
  • 30 GB capacity stores operating system and core applications
  • 2 MB cache buffers frequent read and write requests
  • IDE Ultra ATA100 interface connects to legacy desktop motherboards
  • 5 inch form factor fits standard internal drive bays

Seagate BarraCuda V 30GB IDE hard drive

The Seagate ST330013A is a 30GB 3.5-inch desktop internal hard drive from the BarraCuda V series. It operates at 7200 RPM with a 2MB cache and connects via an IDE Ultra ATA100 / ATA-6 interface. The drive is supplied as a bare unit in new condition.

Suits legacy IDE systems.

This drive suits owners of older desktops or industrial equipment that require a replacement 3.5-inch IDE drive with a 1-inch height profile. The 9ms average seek time supports typical operating system and application loads of the era. Buyers who need more than 30GB of capacity or a modern interface such as Serial ATA cannot use this model.

IDE Ultra ATA100 interface determines compatibility

The single specification that decides fitment is the IDE Ultra ATA100 / ATA-6 interface. The host system must provide a 40-pin IDE connector and support the ATA-6 command set for the drive to function. Without that interface the drive cannot be installed regardless of its physical dimensions.

Helstu kostir

  • 7200 RPM spindle speed accelerates data access
  • 30 GB capacity stores operating system and core applications
  • 2 MB cache buffers frequent read and write requests
  • IDE Ultra ATA100 interface connects to legacy desktop motherboards
  • 5 inch form factor fits standard internal drive bays

Tæknilýsing

BrandSeagate
SeriesBarraCuda V
ModelST330013A
PackagingBare Drive
InterfaceIDE Ultra ATA100 / ATA-6
Capacity30GB
RPM7200 RPM
Cache2MB
Average Seek Time9ms
Form Factor3.5"
Height (maximum)1"
Width (maximum)4"
Length (maximum)5.5"
Sendingarþyngd0.68 kg
Stærð sendingar203 × 152 × 51 mm

Spurningar um þessa vöru

What real-world transfer rate does the IDE Ultra ATA100 interface cap at?

The IDE Ultra ATA100 interface caps at 100 MB/s burst transfer rate.

What physical space does the 3.5 inch form factor with 1 inch height need to fit?

It needs a standard 3.5 inch drive bay measuring at least 5.5 inches long, 4 inches wide and 1 inch high.

How is the bare drive installed, and which jumper step is often missed?

Mount the drive in a 3.5 inch bay, connect the 40-pin IDE cable and 4-pin power, then set the master or slave jumper before powering on.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.