Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small silver 2.5 inch SAS hard drive with label showing model ST9600205SS 600GB 10000RPM

Seagate

Seagate ST9600205SS Savvio 10K.5 600GB 10000RPM 2.5" SAS internal hard drive

SKU CH-50N9-4DTHR

A 2.5" SAS enterprise drive delivering 600 GB at 10 000 RPM with 64 MB cache

  • 600 GB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • 64 MB cache buffers frequent read and write operations
  • SAS 6 Gb/s interface connects to enterprise controllers
  • 5 inch form factor fits dense server bays

Enterprise 2.5-inch SAS drive

The Seagate Savvio 10K.5 is a 600 GB internal hard drive spinning at 10000 RPM with a 6 Gb/s SAS interface and 64 MB cache. It targets servers and storage arrays that need fast, consistent access to transactional data. The 2.5-inch form factor fits dense drive bays in rackmount chassis and blade systems.

Small form factor with SAS connectivity

A standard 2.5-inch SAS connector provides both power and data through a single backplane slot, simplifying hot-swap maintenance in compatible enclosures. The drive carries zero hours on the clock, so it arrives without prior wear. Mechanical mounting points follow the common 2.5-inch pattern used in enterprise trays.

High-speed spindle with managed thermals

The 10000 RPM spindle delivers low latency for random workloads while the SAS interface supports command queuing to optimise throughput. Power draw and acoustic output remain within typical enterprise 2.5-inch ranges, allowing multiple units to operate side by side in cooled cabinets without exceeding thermal limits.

Privalumai

  • 600 GB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • 64 MB cache buffers frequent read and write operations
  • SAS 6 Gb/s interface connects to enterprise controllers
  • 5 inch form factor fits dense server bays

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

What does the SAS 6Gb/s interface limit in real-world throughput?

The SAS 6Gb/s link caps sustained transfers at roughly 600MB/s, so the 10000RPM drive cannot exceed that ceiling even on sequential workloads.

Which drive bay and mounting holes does the 2.5" form factor require?

It fits a standard 2.5-inch bay with the industry screw pattern; no adapter is needed for servers or arrays that accept 2.5-inch SAS drives.

How is the drive installed in a hot-swap tray, and what step is often missed?

Slide the unit into the tray until the SAS connector seats firmly, then secure the tray latch; the step often missed is verifying the latch clicks fully to guarantee electrical contact.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.