Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small silver 2.5 inch SAS hard drive with label showing model ST9600205SS 600GB 10000RPM

Seagate

Seagate ST9600205SS Savvio 10K.5 600GB 10000RPM 2.5" SAS internal hard drive

SKU CH-50N9-4DTHR

A 2.5" SAS enterprise drive delivering 600 GB at 10 000 RPM with 64 MB cache

  • 600 GB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • 64 MB cache buffers frequent read and write operations
  • SAS 6 Gb/s interface connects to enterprise controllers
  • 5 inch form factor fits dense server bays

Enterprise 2.5-inch SAS drive

The Seagate Savvio 10K.5 is a 600 GB internal hard drive spinning at 10000 RPM with a 6 Gb/s SAS interface and 64 MB cache. It targets servers and storage arrays that need fast, consistent access to transactional data. The 2.5-inch form factor fits dense drive bays in rackmount chassis and blade systems.

Small form factor with SAS connectivity

A standard 2.5-inch SAS connector provides both power and data through a single backplane slot, simplifying hot-swap maintenance in compatible enclosures. The drive carries zero hours on the clock, so it arrives without prior wear. Mechanical mounting points follow the common 2.5-inch pattern used in enterprise trays.

High-speed spindle with managed thermals

The 10000 RPM spindle delivers low latency for random workloads while the SAS interface supports command queuing to optimise throughput. Power draw and acoustic output remain within typical enterprise 2.5-inch ranges, allowing multiple units to operate side by side in cooled cabinets without exceeding thermal limits.

Kohokohdat

  • 600 GB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • 64 MB cache buffers frequent read and write operations
  • SAS 6 Gb/s interface connects to enterprise controllers
  • 5 inch form factor fits dense server bays

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What does the SAS 6Gb/s interface limit in real-world throughput?

The SAS 6Gb/s link caps sustained transfers at roughly 600MB/s, so the 10000RPM drive cannot exceed that ceiling even on sequential workloads.

Which drive bay and mounting holes does the 2.5" form factor require?

It fits a standard 2.5-inch bay with the industry screw pattern; no adapter is needed for servers or arrays that accept 2.5-inch SAS drives.

How is the drive installed in a hot-swap tray, and what step is often missed?

Slide the unit into the tray until the SAS connector seats firmly, then secure the tray latch; the step often missed is verifying the latch clicks fully to guarantee electrical contact.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.