Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green PCB adapter board with gold SATA connector and USB 2.0 cable

SMUGDESK

SMUGDESK 1.8 Inch mSATA to SATA Adapter with 7+15Pin Port and SATA to USB 2.0 Cable

SKU CH-34KT-X08CA

Converts a 1.8-inch mSATA SSD to standard 7+15Pin SATA and includes a USB 2.0 cable for external portable storage

  • Converts 1.8 inch mSATA SSD to standard SATA with 7+15Pin port
  • Includes SATA to USB 2.0 cable for direct external connection to USB port
  • Plug and play with hot swap support across Windows, macOS and Linux
  • Compact board ensures stable signal transmission for data recovery and SSD reuse
  • Tool-free installation enables quick disk testing and mobile data backup

1.8-inch mSATA SSD adapter

This adapter converts a 1.8-inch mSATA solid-state drive into a standard 7+15Pin SATA interface. The included SATA to USB 2.0 cable then lets you connect the drive externally to a computer. It is aimed at users who want to reuse idle 1.8-inch mSATA SSDs for portable storage, data recovery or disk testing without buying a separate enclosure.

Plug-and-play thermals and power

The board draws power directly from the host SATA or USB connection and requires no external supply. Passive operation means there is no fan noise during normal use. The simple circuit layout keeps heat low enough for occasional file backup or data migration tasks.

Compact PCB with hot-swap support

The small circuit board uses optimised wiring for stable signal transmission and fits easily into tight workspaces. Hot-swap capability lets you insert or remove the mSATA drive while the system is running, which is convenient for quick disk checks or mobile backups. No drivers are needed on Windows, macOS or Linux.

Privalumai

  • Converts 1.8 inch mSATA SSD to standard SATA with 7+15Pin port
  • Includes SATA to USB 2.0 cable for direct external connection to USB port
  • Plug and play with hot swap support across Windows, macOS and Linux
  • Compact board ensures stable signal transmission for data recovery and SSD reuse
  • Tool-free installation enables quick disk testing and mobile data backup

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I install a 1.8-inch mSATA SSD onto the adapter board and connect it to my computer?

Insert the 1.8-inch mSATA SSD into the onboard slot, secure it if a screw hole is present, then plug the board's 7+15Pin SATA connector into a SATA port or use the included SATA to USB 2.0 cable for external USB connection. No drivers are required.

What maintenance or replacement will the SATA to USB 2.0 cable need over time?

The USB 2.0 cable may wear at the connectors or develop internal wire fatigue after repeated plugging and unplugging; replace it with any standard SATA to USB 2.0 cable if data errors or loose fit occur.

What speed limit appears first when transferring large files continuously through the USB 2.0 link?

The USB 2.0 interface caps sustained transfer at its native 2.0 signalling rate, so throughput will plateau there well before the SATA side or the mSATA SSD reaches its own limits.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.