Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green PCB adapter board with gold SATA connector and USB 2.0 cable

SMUGDESK

SMUGDESK 1.8 Inch mSATA to SATA Adapter with 7+15Pin Port and SATA to USB 2.0 Cable

SKU CH-34KT-X08CA

Converts a 1.8-inch mSATA SSD to standard 7+15Pin SATA and includes a USB 2.0 cable for external portable storage

  • Converts 1.8 inch mSATA SSD to standard SATA with 7+15Pin port
  • Includes SATA to USB 2.0 cable for direct external connection to USB port
  • Plug and play with hot swap support across Windows, macOS and Linux
  • Compact board ensures stable signal transmission for data recovery and SSD reuse
  • Tool-free installation enables quick disk testing and mobile data backup

1.8-inch mSATA SSD adapter

This adapter converts a 1.8-inch mSATA solid-state drive into a standard 7+15Pin SATA interface. The included SATA to USB 2.0 cable then lets you connect the drive externally to a computer. It is aimed at users who want to reuse idle 1.8-inch mSATA SSDs for portable storage, data recovery or disk testing without buying a separate enclosure.

Plug-and-play thermals and power

The board draws power directly from the host SATA or USB connection and requires no external supply. Passive operation means there is no fan noise during normal use. The simple circuit layout keeps heat low enough for occasional file backup or data migration tasks.

Compact PCB with hot-swap support

The small circuit board uses optimised wiring for stable signal transmission and fits easily into tight workspaces. Hot-swap capability lets you insert or remove the mSATA drive while the system is running, which is convenient for quick disk checks or mobile backups. No drivers are needed on Windows, macOS or Linux.

Poudarki

  • Converts 1.8 inch mSATA SSD to standard SATA with 7+15Pin port
  • Includes SATA to USB 2.0 cable for direct external connection to USB port
  • Plug and play with hot swap support across Windows, macOS and Linux
  • Compact board ensures stable signal transmission for data recovery and SSD reuse
  • Tool-free installation enables quick disk testing and mobile data backup

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I install a 1.8-inch mSATA SSD onto the adapter board and connect it to my computer?

Insert the 1.8-inch mSATA SSD into the onboard slot, secure it if a screw hole is present, then plug the board's 7+15Pin SATA connector into a SATA port or use the included SATA to USB 2.0 cable for external USB connection. No drivers are required.

What maintenance or replacement will the SATA to USB 2.0 cable need over time?

The USB 2.0 cable may wear at the connectors or develop internal wire fatigue after repeated plugging and unplugging; replace it with any standard SATA to USB 2.0 cable if data errors or loose fit occur.

What speed limit appears first when transferring large files continuously through the USB 2.0 link?

The USB 2.0 interface caps sustained transfer at its native 2.0 signalling rate, so throughput will plateau there well before the SATA side or the mSATA SSD reaches its own limits.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.