אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green PCB adapter board with gold SATA connector and USB 2.0 cable

SMUGDESK

SMUGDESK 1.8 Inch mSATA to SATA Adapter with 7+15Pin Port and SATA to USB 2.0 Cable

SKU CH-34KT-X08CA

Converts a 1.8-inch mSATA SSD to standard 7+15Pin SATA and includes a USB 2.0 cable for external portable storage

  • Converts 1.8 inch mSATA SSD to standard SATA with 7+15Pin port
  • Includes SATA to USB 2.0 cable for direct external connection to USB port
  • Plug and play with hot swap support across Windows, macOS and Linux
  • Compact board ensures stable signal transmission for data recovery and SSD reuse
  • Tool-free installation enables quick disk testing and mobile data backup

1.8-inch mSATA SSD adapter

This adapter converts a 1.8-inch mSATA solid-state drive into a standard 7+15Pin SATA interface. The included SATA to USB 2.0 cable then lets you connect the drive externally to a computer. It is aimed at users who want to reuse idle 1.8-inch mSATA SSDs for portable storage, data recovery or disk testing without buying a separate enclosure.

Plug-and-play thermals and power

The board draws power directly from the host SATA or USB connection and requires no external supply. Passive operation means there is no fan noise during normal use. The simple circuit layout keeps heat low enough for occasional file backup or data migration tasks.

Compact PCB with hot-swap support

The small circuit board uses optimised wiring for stable signal transmission and fits easily into tight workspaces. Hot-swap capability lets you insert or remove the mSATA drive while the system is running, which is convenient for quick disk checks or mobile backups. No drivers are needed on Windows, macOS or Linux.

נקודות עיקריות

  • Converts 1.8 inch mSATA SSD to standard SATA with 7+15Pin port
  • Includes SATA to USB 2.0 cable for direct external connection to USB port
  • Plug and play with hot swap support across Windows, macOS and Linux
  • Compact board ensures stable signal transmission for data recovery and SSD reuse
  • Tool-free installation enables quick disk testing and mobile data backup

מפרט טכני

טרם פורסם מפרט טכני לפריט זה.

שאלות על הפריט הזה

How do I install a 1.8-inch mSATA SSD onto the adapter board and connect it to my computer?

Insert the 1.8-inch mSATA SSD into the onboard slot, secure it if a screw hole is present, then plug the board's 7+15Pin SATA connector into a SATA port or use the included SATA to USB 2.0 cable for external USB connection. No drivers are required.

What maintenance or replacement will the SATA to USB 2.0 cable need over time?

The USB 2.0 cable may wear at the connectors or develop internal wire fatigue after repeated plugging and unplugging; replace it with any standard SATA to USB 2.0 cable if data errors or loose fit occur.

What speed limit appears first when transferring large files continuously through the USB 2.0 link?

The USB 2.0 interface caps sustained transfer at its native 2.0 signalling rate, so throughput will plateau there well before the SATA side or the mSATA SSD reaches its own limits.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.