Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 80mm square case fan 25mm thick with 3 pin connector

STARTECH

STARTECH FAN8X25TX3L 80mm 2000 RPM 26.6 CFM 27 dBA 3 Pin Ball Bearing Case Fan

SKU CH-QYQW-M565S MPN FAN8X25TX3L

An 80mm ball-bearing case fan delivering 26.6 CFM at 2000 RPM and 27 dBA with a 3-pin connector

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size80mm
  • Fan Thickness25mm

Fan Size 80mm

Model TX3 - Quiet

  • 80 mm size fits compact chassis
  • 2000 RPM delivers 26.6 CFM airflow
  • Ball bearing extends operational lifespan
  • 27 dBA keeps system acoustics low
  • 3-pin connector enables motherboard speed control

Compact 80mm case fan for targeted airflow

The StarTech.com FAN8X25TX3L is a single 80mm case fan designed to add supplementary cooling inside a computer chassis. It spins at 2000 RPM to deliver 26.6 CFM of airflow while producing 27 dBA of noise. A ball bearing is used to increase reliability and extend operating life. The unit connects via a standard 3-pin power connector and measures 80 x 80 x 25mm in black.

Suits builds needing an 80mm replacement or upgrade

This fan fits cases and mounts that specifically require an 80mm by 25mm form factor. Users who need higher static pressure for dense radiators or heatsinks should consider alternative designs. Systems that rely on PWM speed control will not benefit from the fixed 3-pin connection. Buyers wanting silent operation below 20 dBA will find the acoustic output too high.

The 80mm mounting footprint decides fit

The physical dimensions of 80 x 80 x 25mm are the sole determinant of whether this fan can be installed in a given case or bracket. No adapter brackets or alternative mounting hardware are included in the package. Verify the exact mounting hole spacing and clearance before purchase. The included package content reference is 986040.

Privalumai

  • 80 mm size fits compact chassis
  • 2000 RPM delivers 26.6 CFM airflow
  • Ball bearing extends operational lifespan
  • 27 dBA keeps system acoustics low
  • 3-pin connector enables motherboard speed control

Specifikacijos

BrandStarTech.com
ModelFAN8X25TX3L
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size80mm
Fan Thickness25mm
Bearing TypeBall
RPM2000 RPM
Air Flow26.6 CFM
Noise Level27 dBA
Power Connector3 Pin
ColorBlack
FeaturesBall Bearing in the cooling fan provides increased airflow, reliability and longer life
Dimensions80 x 80 x 25mm
Package Contents986040
Siuntos svoris0.10 kg
Pakuotės dydis142 × 94 × 32 mm

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 80mm by 25mm frame fit my case's 80mm mounting holes?

Yes, the fan measures 80mm square and 25mm thick, matching the standard 80mm mounting pattern used by most PC cases.

How do I connect the 3-pin power connector without a fan controller?

Plug the 3-pin connector directly into a motherboard 3-pin or 4-pin fan header; alignment tabs prevent incorrect insertion, but ensure the clip seats fully.

When should I replace the ball-bearing fan?

Ball bearings typically run for years; replace the fan if noise rises above the rated 27 dBA or airflow drops below 26.6 CFM.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.