STARTECH FANCASE 80mm PCI Slot Cooler 2200 RPM 6.9 CFM 32 dBA Black
- 1 Fan
- No Controller
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
STARTECH
An 80 mm case fan with ball bearing, 3000 RPM, 37.3 CFM airflow and 34 dBA noise
Model TX3
The STARTECH FANBOX2 is an 80 mm case fan designed to add targeted airflow inside compatible computer chassis. Its 25 mm thickness fits standard mounting points and the 3-pin power connector works with most motherboard headers or fan controllers. The single-fan package suits builders who need extra cooling in tight spaces.
A ball bearing supports the 3000 RPM spindle speed, delivering 37.3 CFM of airflow at a rated 34 dBA noise level. The bearing choice aims to extend service life while maintaining consistent rotational stability. Power draw is handled through the 3-pin connector without a separate controller.
Under continuous operation the fan maintains its 3000 RPM rating and 37.3 CFM output, so airflow does not taper off during extended sessions. The 34 dBA acoustic figure reflects steady-state sound rather than a momentary peak. Builders who need variable speed control or larger diameter fans for lower noise at equivalent airflow should look elsewhere.
| Brand | StarTech.com |
|---|---|
| Model | FANBOX2 |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 80mm |
| Fan Thickness | 25mm |
| Bearing Type | Ball |
| RPM | 3000 RPM |
| Air Flow | 37.3 CFM |
| Noise Level | 34 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Features | Ball Bearing in the cooling fan provides increased airflow, reliability and longer life |
| Dimensions | 80 x 80 x 25mm |
| Package Contents | 748229 |
| Siuntos svoris | 0.10 kg |
| Pakuotės dydis | 114 × 91 × 33 mm |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
Align the four screw holes on the 80 x 80 x 25mm frame with your case mounting points, secure with screws, then plug the 3-pin connector into a motherboard fan header or fan controller.
The ball bearing is sealed and requires no lubrication; if noise rises above the rated 34 dBA or airflow drops below 37.3 CFM, replace the fan.
Sustained operation at 3000 RPM is the design limit; the motor will reach its thermal and acoustic ceiling before any other component.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?