STARTECH FANCASE 80mm PCI Slot Cooler 2200 RPM 6.9 CFM 32 dBA Black
- 1 Fan
- No Controller
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
STARTECH
An 80 mm case fan with ball bearing, 3000 RPM, 37.3 CFM airflow and 34 dBA noise
Model TX3
The STARTECH FANBOX2 is an 80 mm case fan designed to add targeted airflow inside compatible computer chassis. Its 25 mm thickness fits standard mounting points and the 3-pin power connector works with most motherboard headers or fan controllers. The single-fan package suits builders who need extra cooling in tight spaces.
A ball bearing supports the 3000 RPM spindle speed, delivering 37.3 CFM of airflow at a rated 34 dBA noise level. The bearing choice aims to extend service life while maintaining consistent rotational stability. Power draw is handled through the 3-pin connector without a separate controller.
Under continuous operation the fan maintains its 3000 RPM rating and 37.3 CFM output, so airflow does not taper off during extended sessions. The 34 dBA acoustic figure reflects steady-state sound rather than a momentary peak. Builders who need variable speed control or larger diameter fans for lower noise at equivalent airflow should look elsewhere.
| Brand | StarTech.com |
|---|---|
| Model | FANBOX2 |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 80mm |
| Fan Thickness | 25mm |
| Bearing Type | Ball |
| RPM | 3000 RPM |
| Air Flow | 37.3 CFM |
| Noise Level | 34 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Features | Ball Bearing in the cooling fan provides increased airflow, reliability and longer life |
| Dimensions | 80 x 80 x 25mm |
| Package Contents | 748229 |
| Prepravná hmotnosť | 0.10 kg |
| Rozmery balenia | 114 × 91 × 33 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Align the four screw holes on the 80 x 80 x 25mm frame with your case mounting points, secure with screws, then plug the 3-pin connector into a motherboard fan header or fan controller.
The ball bearing is sealed and requires no lubrication; if noise rises above the rated 34 dBA or airflow drops below 37.3 CFM, replace the fan.
Sustained operation at 3000 RPM is the design limit; the motor will reach its thermal and acoustic ceiling before any other component.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?