STARTECH FANCASE 80mm PCI Slot Cooler 2200 RPM 6.9 CFM 32 dBA Black
- 1 Fan
- No Controller
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
STARTECH
An 80 mm case fan with ball bearing, 3000 RPM, 37.3 CFM airflow and 34 dBA noise
Model TX3
The STARTECH FANBOX2 is an 80 mm case fan designed to add targeted airflow inside compatible computer chassis. Its 25 mm thickness fits standard mounting points and the 3-pin power connector works with most motherboard headers or fan controllers. The single-fan package suits builders who need extra cooling in tight spaces.
A ball bearing supports the 3000 RPM spindle speed, delivering 37.3 CFM of airflow at a rated 34 dBA noise level. The bearing choice aims to extend service life while maintaining consistent rotational stability. Power draw is handled through the 3-pin connector without a separate controller.
Under continuous operation the fan maintains its 3000 RPM rating and 37.3 CFM output, so airflow does not taper off during extended sessions. The 34 dBA acoustic figure reflects steady-state sound rather than a momentary peak. Builders who need variable speed control or larger diameter fans for lower noise at equivalent airflow should look elsewhere.
| Brand | StarTech.com |
|---|---|
| Model | FANBOX2 |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 80mm |
| Fan Thickness | 25mm |
| Bearing Type | Ball |
| RPM | 3000 RPM |
| Air Flow | 37.3 CFM |
| Noise Level | 34 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Features | Ball Bearing in the cooling fan provides increased airflow, reliability and longer life |
| Dimensions | 80 x 80 x 25mm |
| Package Contents | 748229 |
| Тегло на пратката | 0.10 kg |
| Размери на опаковката | 114 × 91 × 33 mm |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Align the four screw holes on the 80 x 80 x 25mm frame with your case mounting points, secure with screws, then plug the 3-pin connector into a motherboard fan header or fan controller.
The ball bearing is sealed and requires no lubrication; if noise rises above the rated 34 dBA or airflow drops below 37.3 CFM, replace the fan.
Sustained operation at 3000 RPM is the design limit; the motor will reach its thermal and acoustic ceiling before any other component.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?