Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black 80mm square case fan 25mm thick with 3 pin connector

STARTECH

STARTECH FAN8X25TX3L 80mm 2000 RPM 26.6 CFM 27 dBA 3 Pin Ball Bearing Case Fan

SKU CH-QYQW-M565S MPN FAN8X25TX3L

An 80mm ball-bearing case fan delivering 26.6 CFM at 2000 RPM and 27 dBA with a 3-pin connector

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size80mm
  • Fan Thickness25mm

Fan Size 80mm

Model TX3 - Quiet

  • 80 mm size fits compact chassis
  • 2000 RPM delivers 26.6 CFM airflow
  • Ball bearing extends operational lifespan
  • 27 dBA keeps system acoustics low
  • 3-pin connector enables motherboard speed control

Compact 80mm case fan for targeted airflow

The StarTech.com FAN8X25TX3L is a single 80mm case fan designed to add supplementary cooling inside a computer chassis. It spins at 2000 RPM to deliver 26.6 CFM of airflow while producing 27 dBA of noise. A ball bearing is used to increase reliability and extend operating life. The unit connects via a standard 3-pin power connector and measures 80 x 80 x 25mm in black.

Suits builds needing an 80mm replacement or upgrade

This fan fits cases and mounts that specifically require an 80mm by 25mm form factor. Users who need higher static pressure for dense radiators or heatsinks should consider alternative designs. Systems that rely on PWM speed control will not benefit from the fixed 3-pin connection. Buyers wanting silent operation below 20 dBA will find the acoustic output too high.

The 80mm mounting footprint decides fit

The physical dimensions of 80 x 80 x 25mm are the sole determinant of whether this fan can be installed in a given case or bracket. No adapter brackets or alternative mounting hardware are included in the package. Verify the exact mounting hole spacing and clearance before purchase. The included package content reference is 986040.

Öne çıkanlar

  • 80 mm size fits compact chassis
  • 2000 RPM delivers 26.6 CFM airflow
  • Ball bearing extends operational lifespan
  • 27 dBA keeps system acoustics low
  • 3-pin connector enables motherboard speed control

Teknik özellikler

BrandStarTech.com
ModelFAN8X25TX3L
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size80mm
Fan Thickness25mm
Bearing TypeBall
RPM2000 RPM
Air Flow26.6 CFM
Noise Level27 dBA
Power Connector3 Pin
ColorBlack
FeaturesBall Bearing in the cooling fan provides increased airflow, reliability and longer life
Dimensions80 x 80 x 25mm
Package Contents986040
Kargo ağırlığı0.10 kg
Koli boyutu142 × 94 × 32 mm

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will the 80mm by 25mm frame fit my case's 80mm mounting holes?

Yes, the fan measures 80mm square and 25mm thick, matching the standard 80mm mounting pattern used by most PC cases.

How do I connect the 3-pin power connector without a fan controller?

Plug the 3-pin connector directly into a motherboard 3-pin or 4-pin fan header; alignment tabs prevent incorrect insertion, but ensure the clip seats fully.

When should I replace the ball-bearing fan?

Ball bearings typically run for years; replace the fan if noise rises above the rated 27 dBA or airflow drops below 26.6 CFM.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.