STARTECH FAN6X25TX3H 60x25mm case fan 5000 RPM 26.63 CFM 30 dBA
- 1 Fan
- No Controller
Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.
STARTECH
An 80 mm case fan with ball bearing, 3000 RPM, 37.3 CFM airflow and 34 dBA noise
Model TX3
The STARTECH FANBOX2 is an 80 mm case fan designed to add targeted airflow inside compatible computer chassis. Its 25 mm thickness fits standard mounting points and the 3-pin power connector works with most motherboard headers or fan controllers. The single-fan package suits builders who need extra cooling in tight spaces.
A ball bearing supports the 3000 RPM spindle speed, delivering 37.3 CFM of airflow at a rated 34 dBA noise level. The bearing choice aims to extend service life while maintaining consistent rotational stability. Power draw is handled through the 3-pin connector without a separate controller.
Under continuous operation the fan maintains its 3000 RPM rating and 37.3 CFM output, so airflow does not taper off during extended sessions. The 34 dBA acoustic figure reflects steady-state sound rather than a momentary peak. Builders who need variable speed control or larger diameter fans for lower noise at equivalent airflow should look elsewhere.
| Brand | StarTech.com |
|---|---|
| Model | FANBOX2 |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 80mm |
| Fan Thickness | 25mm |
| Bearing Type | Ball |
| RPM | 3000 RPM |
| Air Flow | 37.3 CFM |
| Noise Level | 34 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Features | Ball Bearing in the cooling fan provides increased airflow, reliability and longer life |
| Dimensions | 80 x 80 x 25mm |
| Package Contents | 748229 |
| Kargo ağırlığı | 0.10 kg |
| Koli boyutu | 114 × 91 × 33 mm |
Bu modelin diğer sürümleri
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Align the four screw holes on the 80 x 80 x 25mm frame with your case mounting points, secure with screws, then plug the 3-pin connector into a motherboard fan header or fan controller.
The ball bearing is sealed and requires no lubrication; if noise rises above the rated 34 dBA or airflow drops below 37.3 CFM, replace the fan.
Sustained operation at 3000 RPM is the design limit; the motor will reach its thermal and acoustic ceiling before any other component.
Bu reyondan diğerleri
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Ödediğiniz koin ve fiyatları gördüğünüz para birimi.
Ödeme sırasında cüzdanınızdan gönderilir.
Yalnızca görüntüleme içindir — katalog USD cinsinden fiyatlandırılır.
Eşleşen para birimi yok.
Sitenin size hangi dilde hitap edeceğini seçin.
Eşleşen dil yok.
İlk kez mi geliyorsunuz?
Zaten hesabınız var mı?
Otomatik bir sıfırlama yoktur: bu mağaza hiç e-posta göndermez, dolayısıyla talep edilecek tek kullanımlık bir bağlantı da yoktur. Adresi hesapta bırakın, elle işleme alınır.
Talep alındı
Gelen kutunuza doğru giden hiçbir şey yok — bu mağaza hiç e-posta göndermez. Bunları biri elle işleme alır.
Hatırladınız mı?